开云体育

+ AA6YQ comments below + Yes, an ARRL section that is inconsistent with its QSO's State and County will result in a QSO being considered Broken. + To get a full report of all broken QSOs, click the

That's a hard one from my QTH. Short path mostly across the north pole makes it tough. I have worked them short path on 17 meters Superfox Hound mode. I think that was with 100 watts. I see FT8 spots

Unfortunately the first spot is not CW but FT8. The rest of the times are not good for prop to NA. Paul, W6IBU

Hi Joe, I figured that out and changed the country to fix the broken Qs for KH6 call signs. Now I see that there are many others where there is no clear indication why they are "broken."

They were loud on 12M CW (and 17M SSB) this morning (1300Z). He called for NA and worked NA but I heard a lot of EU calling on 12M CW. Several NA worked on 17M about the same time but not a

+ AA6YQ comments below + If the current version of SpotCollector encounters "FH", "F/H", or "FOX" in spot notes, it sets the Spot Database Entry's Mode to FT8. + In the next version of

+ AA6YQ comments below + 10m CW operations over the last 24 hours? from 4 DX Clusters and DX Summit: Call ? DXCCCountry ? ? ? Freq ? ? ?Mode ?First? ? ? ? ? ? ?Last? ? ? ? ? ?

Bill, seems like they like to work the other side of the pond, but here are some spots from the States.. (has been a few days though) | KN9K-@ | 28033.0 | VK9XU | 02:35 21 Feb |

Bill this is a VERY small clip from DXSUMMIT.FI. You have been missing them. | W1PLSE-@ | 28000.0 | VK9XU | 14:57 24 Feb | plus 10m cw for NA now | Christmas Island | |

Now that WSJT-X has a new FT8 mode, SuperFox it might be useful if Spot Collector recognized SFH or S/FH or similar in a spot's notes as an FT8 mode to override the subband mode as it already does for

You will have to do setup from scratch if you have no Workspace backup. If you have even an old Workspace backup you may be able to use it if a lot of settings you may never or seldom change anyway to

Has anybody heard when they will be on 10m CW? Or is it wait and see? -- Bill W5EC

Are you installing on a fresh copy of Windows (or a copy with a fresh registry due to a Windows reset)? If so, follow the recommendations here:

Greetings from Athens! I have in my backup a copy of the whole DXLAB folder. How can I restore DXKEEPER setup from it? Unfortunately I don't have a latest & greatest registry backup from DXLAB. 73 de

... via the Databases tab of DXView's Configuration window. Terminate DXKeeper and SpotCollector before directing DXView to update these databases. The eQSL AG Database contains callsigns that are

Change DXCC from KH6 to K then edit State and Section. 73, ... Joe, W4TV

Occasionally I click on the "Broke" tab in DXKeeper to see what I need to fix. I found several QSOs today that would not allow me to fix them. For example, these are KH6 call signs used by a station

+ AA6YQ comments beow + I've sent you a new version of Commander that provides a "Callsign & Freq Sections" subpanel in the Colors panel on the Spectrum-Waterfall Configuration window that when set

You gave me the “knowledge to do what I wanted. I wasn’t aware you could use SQL.

+ AA6YQ comments below I don't know how or why, but an icon for Launcher has showed up on my start page in W11. And it works. So let's end the conversation on this topic. There is a new topic.