开云体育

I run a lot of simultaneous programs and am constantly concerned about CPU overload.? ?Watching Task Manager, I notice the Launcher runs about 2.5%? of the load, even after all the programs are up

Hi Dave. If I don't have my computer turned on or I get a loss of internet connection I lose some spots. Is there any way to get them back? I'm using the CQDX network and can get a download of 10,000

WAZ and WPX are like DXCC in mode matching ... they don't care except that the mode is "DATA". The only difference among DXCC, WAZ and WPX is that WAZ separates traditional RTTY from

+ AA6YQ comments below Just to avoid any misunderstanding, I agree that eQSL's current practice is questionable. If you are able to convince eQSL to change that is of course the best solution. I

Just to avoid any misunderstanding, I agree that eQSL's current practice is questionable. If you are able to convince eQSL to change that is of course the best solution. I did not even consider

I've been using AVG Internet Security for years without issues. There are others, but while I see people having issues with their antivirus and DXLabs software, WSJT-X, and JT-Alert, I've not had a

+ AA6YQ comments below + Thanks, Kent! 73, Dave, AA6YQ

I will ask the author of PSTRotator. If I find out anything I will let you know. Thanks 73 Kent N6WT

Jerome, you don't need to set any frequencies or SPLIT. Try this: 'VS1; 'MD0C; 'VS0; 'MD02 <END> This is assuming that the FT-950 does limit the Rx passband in USB-DATA mode, the user manual

I tried several times to capture a screen shot of the fast closing QRZ error screen. After 8 attemps, I got successful. There was a window which stated the wrong verification code was entered. Then

+ AA6YQ comments below Here is my code per Yaesu's CAT-manual and your email about 'split': FA7074000; MD02; FB7074000; MD0C; FT3; + When specifying CAT instructions in a Command Sequence,

Hello Dave, Relative to Bill G4WJS's reply, I'm making a command sequence to put VFO-A in USB and VFO-B at USB-PKT; both set at 7074000 Hz. It is not working; perhaps you can spot my error(s) or

+ AA6YQ comments below But logging into eqsl.cc shows that eQSL considers them a match and thereby represents a confirmed QSO. Although somewhat questionable, I therefore propose DXKeeper considers

+ AA6YQ comments below He might be referring to the fact that some QSO's in eQSL come through as just MFSK, while the majority comes through as MFSK(FT4). + Sounds like one or more logging

+ AA6YQ comments below Pathfinder does not auto log into my QRZ account. The name and password are correct. Both "Atuomatic login" and "Warn if not logged in" are checked. When I click on the

Pathfinder does not auto log into my QRZ account. The name and password are correct. Both "Atuomatic login" and "Warn if not logged in" are checked. When I click on the "Login" button from the

+ AA6YQ comments below Every time I did an error log it was too large to email so I just ran 14.3.1. I didn't change any radio settings from 14.3.1 but all the proceeding updates lost connection

Every time I did an error log it was too large to email so I just ran 14.3.1. I didn't change any radio settings from 14.3.1 but all the proceeding updates lost connection until 14.6.2. Tom

Absolutely not! MFSK without a sub-mode can be any of number of "modes" including MFSK8, MFSK16, and JS8 each of which are recognized for various award programs. Accepting MFSK as equivalent to

+ AA6YQ comments below Commander 14.6.2 solved the problem. I installed Commander 14.6.2 on 6/4 and it found my FT-2000? and it has not lost control of it since and I run my computer 24/7.