开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. DXLab
  2. Messages
Expanded Topics Messages Polls
Date
Re: DXKeeper 1.2.3 is available

Charles Greene
 

At 09:20 AM 4/14/2001 -0400, you wrote:
Dave,

I'm getting a "Page not found" on this link.

---
73, Rich - W3ZJ
Likewise


73, Chas, W1CG
Re: DXKeeper 1.2.3 is available

 

Dave,

I'm getting a "Page not found" on this link.

---
73, Rich - W3ZJ

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Friday, April 13, 2001 11:26 AM
To: dxlab@...
Cc: Dave AA6YQ
Subject: [dxlab] DXKeeper 1.2.3 is available


This release

- properly saves the state of "Show Control
Explanations" between
sessions

- includes instrumentation to detect the
"persistent hourglass" defect
(please be on the lookout for an error log)

- automatically restarts the inter-application
communication link with
DXView, should it terminate

- adds the option of specifying a UTC filter based
on start date and end
date (settings can be adjusted by depressing the
control key while clicking
the UTC filter button)

If you've already installed DXKeeper 1.1.1 or later,
you can upgrade to
version 1.2.3 by downloading and then running
;
your online help will be
updated by this process.

73,

Dave, AA6YQ





To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to



DXKeeper 1.2.3 is available

Dave, AA6YQ
 

This release

- properly saves the state of "Show Control Explanations" between
sessions

- includes instrumentation to detect the "persistent hourglass" defect
(please be on the lookout for an error log)

- automatically restarts the inter-application communication link with
DXView, should it terminate

- adds the option of specifying a UTC filter based on start date and end
date (settings can be adjusted by depressing the control key while clicking
the UTC filter button)

If you've already installed DXKeeper 1.1.1 or later, you can upgrade to
version 1.2.3 by downloading and then running
; your online help will be
updated by this process.

73,

Dave, AA6YQ
Re: Icom RS232 interface from KG7SG

Dave Bernstein
 

No problem, Tom. Lets pick a time this weekend to get together in
real time via HF or landline and we'll walk through the interface
with your meter. Please send me a private email suggesting times that
work for you.

By the way, how are you powering your interface? If its via the RS232
port's modem control signals, you might start by verifying that the
interface has power.

73,

Dave, AA6YQ

--- In dxlab@y..., "Tom Brouard" <stagehand@h...> wrote:
Hi Dave,

Thanks again for your help. I realize that this is sidetracking you
from
your software projects but you are the only one that I know that
understands
the interface.

I have done all that you suggested already with no results. I have
tried the
message window as well with no results either. The Radix is at
hexadecimal.
Receive message box is checked as well.

I do not have a scope but I do have a meter.

Thank you

73 de KB2VNB


-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@m...]
Sent: Wednesday, April 11, 2001 12:23 AM
To: dxlab@y...
Subject: RE: [dxlab] Icom RS232 interface from KG7SG


Tom,

The radio sends data

- if its "CI-V Transceive" setting is on, and you change
frequency or
change modes

- in response to a query from Commander

If you didn't set "CI-V Transceive" to "on" (using the 746 menu, as
described in the manual), then you must configure CI-V Commander to
continuously query the radio by checking the "Continuous Frequency
and Mode
Interrogation" box in Commander's General configuration tab

Alternatively, you can set "CI-V Transceive" to "on", in which case
continuous queries are unnecessary

If neither of the above configurations results in Commander
displaying your
radio's frequency and mode, let me know and we'll take the next
step - which
is to check the message window.

Just in case: do you have a scope or meter?

73,

Dave, AA6YQ


-----Original Message-----
From: Tom Brouard [mailto:stagehand@h...]
Sent: Tuesday, April 10, 2001 19:32 PM
To: Dxlab
Subject: [dxlab] Icom RS232 interface from KG7SG


I am running CI-V Commander version 1.2.2 using the KG7SG
interface I just
made. I am able to control the ICOM 746 via the computer but I
am not
able
to receive any data from the radio.

I have double checked all wiring and software and radio config
settings
with
no luck.

I am still suspicious that it is in the wiring but I am hoping
that it is
something simple in the software or at the radio that I may have
overlooked.

Suggestions from any is gratefully welcomed

Thank you

73 de KB2VNB


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@y...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.






To unsubscribe from this group, send an email to:
dxlab-unsubscribe@y...



Your use of Yahoo! Groups is subject to

Re: Icom RS232 interface from KG7SG

Tom Brouard
 

Hi Dave,

Thanks again for your help. I realize that this is sidetracking you from
your software projects but you are the only one that I know that understands
the interface.

I have done all that you suggested already with no results. I have tried the
message window as well with no results either. The Radix is at hexadecimal.
Receive message box is checked as well.

I do not have a scope but I do have a meter.

Thank you

73 de KB2VNB

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Wednesday, April 11, 2001 12:23 AM
To: dxlab@...
Subject: RE: [dxlab] Icom RS232 interface from KG7SG


Tom,

The radio sends data

- if its "CI-V Transceive" setting is on, and you change frequency or
change modes

- in response to a query from Commander

If you didn't set "CI-V Transceive" to "on" (using the 746 menu, as
described in the manual), then you must configure CI-V Commander to
continuously query the radio by checking the "Continuous Frequency and Mode
Interrogation" box in Commander's General configuration tab

Alternatively, you can set "CI-V Transceive" to "on", in which case
continuous queries are unnecessary

If neither of the above configurations results in Commander displaying your
radio's frequency and mode, let me know and we'll take the next step - which
is to check the message window.

Just in case: do you have a scope or meter?

73,

Dave, AA6YQ


-----Original Message-----
From: Tom Brouard [mailto:stagehand@...]
Sent: Tuesday, April 10, 2001 19:32 PM
To: Dxlab
Subject: [dxlab] Icom RS232 interface from KG7SG


I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
made. I am able to control the ICOM 746 via the computer but I am not
able
to receive any data from the radio.

I have double checked all wiring and software and radio config settings
with
no luck.

I am still suspicious that it is in the wiring but I am hoping that it is
something simple in the software or at the radio that I may have
overlooked.

Suggestions from any is gratefully welcomed

Thank you

73 de KB2VNB


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.






To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to

Re: Icom RS232 interface from KG7SG

Dave, AA6YQ
 

Tom,

The radio sends data

- if its "CI-V Transceive" setting is on, and you change frequency or
change modes

- in response to a query from Commander

If you didn't set "CI-V Transceive" to "on" (using the 746 menu, as
described in the manual), then you must configure CI-V Commander to
continuously query the radio by checking the "Continuous Frequency and Mode
Interrogation" box in Commander's General configuration tab

Alternatively, you can set "CI-V Transceive" to "on", in which case
continuous queries are unnecessary

If neither of the above configurations results in Commander displaying your
radio's frequency and mode, let me know and we'll take the next step - which
is to check the message window.

Just in case: do you have a scope or meter?

73,

Dave, AA6YQ

-----Original Message-----
From: Tom Brouard [mailto:stagehand@...]
Sent: Tuesday, April 10, 2001 19:32 PM
To: Dxlab
Subject: [dxlab] Icom RS232 interface from KG7SG


I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
made. I am able to control the ICOM 746 via the computer but I am not
able
to receive any data from the radio.

I have double checked all wiring and software and radio config settings
with
no luck.

I am still suspicious that it is in the wiring but I am hoping that it is
something simple in the software or at the radio that I may have
overlooked.

Suggestions from any is gratefully welcomed

Thank you

73 de KB2VNB


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Icom RS232 interface from KG7SG

Tom Brouard
 

I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
made. I am able to control the ICOM 746 via the computer but I am not able
to receive any data from the radio.

I have double checked all wiring and software and radio config settings with
no luck.

I am still suspicious that it is in the wiring but I am hoping that it is
something simple in the software or at the radio that I may have overlooked.

Suggestions from any is gratefully welcomed

Thank you

73 de KB2VNB
Re: DXView

 

Oh! I suspect that most of us are well aware that you can only put
off the honey do issues for just so long before the roof caves in
:-))

------
73, Rich - W3ZJ

-----Original Message-----
From: Dave Bernstein [mailto:dhb@...]
Sent: Tuesday, April 10, 2001 1:21 PM
To: dxlab@...
Subject: [dxlab] Re: DXView


Certainly. But I'd like to track down and correct the
DXView-PropView-
DXKeeper interaction problem, as well as the DXKeeper
"misbehaviour"
issue first.

Unfortunately, I have an XYL-driven furniture repair
project that
takes precedence over both of these, but it shouldn't
involve more
than a few hours work. If the above defects were
showstoppers, I
might apply for a variance, but...

73,

Dave, AA6YQ

--- In dxlab@y..., "Ron Eberson" <zx@c...> wrote:


-Dave is it posible to make a second button on the
window at GO in
DXView?
this button can copy the call to DXKeeper and so you
can use it
direct now i
must type the call again in DXKeeper also i can use
Propview direct.

Ron

To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to
Re: DXView

Dave Bernstein
 

Certainly. But I'd like to track down and correct the DXView-PropView-
DXKeeper interaction problem, as well as the DXKeeper "misbehaviour"
issue first.

Unfortunately, I have an XYL-driven furniture repair project that
takes precedence over both of these, but it shouldn't involve more
than a few hours work. If the above defects were showstoppers, I
might apply for a variance, but...

73,

Dave, AA6YQ

--- In dxlab@y..., "Ron Eberson" <zx@c...> wrote:


-Dave is it posible to make a second button on the window at GO in
DXView?
this button can copy the call to DXKeeper and so you can use it
direct now i
must type the call again in DXKeeper also i can use Propview direct.

Ron
DXView

Ron Eberson
 

-Dave is it posible to make a second button on the window at GO in DXView?
this button can copy the call to DXKeeper and so you can use it direct now i
must type the call again in DXKeeper also i can use Propview direct.

Ron
Re: FW: PropView 1.0.5 is available

 

Dave,

This does not correct the problem where the connection between
DXKeeper and DXView is not established when you start DXView after
both DXKeeper and PropView are already running.

I also have problems at other times where the communication
between the various applications seems to break down but I haven't
yet been able to identify a consistent sequence of operations that
cause that. However, this one with DXKeeper and PropView followed
by DXView is very consistent.

----
73, Rich - W3ZJ

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Tuesday, April 10, 2001 12:20 AM
To: I. J. Roberts; bobrushby@...; 0586-37190@...;
wp.schwarzott@...; office@...;
johnki4ro@...
Cc: dxlab@...; Dave AA6YQ
Subject: [dxlab] FW: PropView 1.0.5 is available


This release corrects the defect responsible for
generating a runtime error
if DXView is not installed.

You can upgrade to PropView 1.0.5 by downloading and running
www.qsl.net/propview/PropView105Update.exe -- it will install
PropView105.exe , which
you can then run.

73,

Dave, AA6YQ



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to
Re: DXKeeper 1.2.2 "Show control explanations"

Dave, AA6YQ
 

Will be fixed in 1.2.3.

73,

Dave, AA6YQ

-----Original Message-----
From: Richard B Drake [mailto:rich@...]
Sent: Monday, April 09, 2001 10:05 AM
To: Dxlab
Subject: [dxlab] DXKeeper 1.2.2 "Show control explanations"


DXkeeper does not remember from one session to the next that I
have turned off "Show control explanations"

-----
73, Rich - W3ZJ
www.w3zj.com


Yahoo! Groups Sponsor

>>
Enter Business Search Term above





To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
FW: PropView 1.0.5 is available

Dave, AA6YQ
 

This release corrects the defect responsible for generating a runtime error
if DXView is not installed.

You can upgrade to PropView 1.0.5 by downloading and running
www.qsl.net/propview/PropView105Update.exe -- it will install
PropView105.exe , which
you can then run.

73,

Dave, AA6YQ
DXKeeper 1.2.2 "Show control explanations"

 

DXkeeper does not remember from one session to the next that I
have turned off "Show control explanations"

-----
73, Rich - W3ZJ
www.w3zj.com
Re: DXView 1.2.8

Bernard Backaert
 

Hello Dave,

Just to let you know that here everything is now working fine, DXview and
Propview, no problems anymore to enter new coordinates

Thanks

Best 73 Ben ON5GQ

****
Bernard Backaert
Amateur Radio Station ON5GQ
Email : bbackaert@...
: on5gq@...
Please visit : www.qsl.net/on5gq
****
Re: DXKeeper 122

 

A little more info on this one. If the original callsign is in the
log, there is no problem. It's only when the callsign is not there
and the log display screen is empty after pressing enter. In this
case you actually don't even have to change the callsign in the
capture window, just press enter a second time and it's in
trouble.

73, Rich - W3ZJ

-----Original Message-----
From: Richard B Drake [mailto:rich@...]
Sent: Sunday, April 08, 2001 5:07 PM
To: dxlab@...
Subject: RE: [dxlab] DXKeeper 122


Yup, every time. I tried shutting down all other applications to
see if that had any affect - it didn't.

1) Type W7JJ into the capture window (a fictitious call
sign, not
in log) and press enter.

2) Correct the callsign to W7JJK, press enter again.

3 Click "log". Nothing happens, moving the cursor to
the DXKeeper
window displays a permanent hour glass cursor.

4) Shut down DXKeeper and restart, the QSO is not logged.

-----
73, Rich - W3ZJ

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Sunday, April 08, 2001 4:45 PM
To: dxlab@...
Subject: RE: [dxlab] DXKeeper 122


Hmm, I can't replicate this one either. Are you doing
anything in particular
between the first lookup and the correction to the
callsign? Does it fail
every time?

73,

Dave, AA6YQ
-----Original Message-----
From: Richard B Drake [mailto:rich@...]
Sent: Sunday, April 08, 2001 14:51 PM
To: Dxlab
Subject: [dxlab] DXKeeper 122


Dave,

I have occasionally experienced a problem with
DXKeeper hanging up
on me, it seems to get stuck in an infinite loop.
It took me a
while to figure out how to reproduce it, but here
it is. If I
enter a call in the capture window and press enter to
do the look
up, then later without clearing the capture window I
go back and
make a correction to the callsign and press enter again,
everything seems fine but when I go to log that QSO,
DXKeeper is
hung up.

-----
73, Rich - W3ZJ
www.w3zj.com


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.






To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to





To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to
Re: DXView 1.2.8

 

OK, a little more info on this one. It works OK as long as
PropView is not running. With PropView running it fails.

73, Rich - W3ZJ

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Sunday, April 08, 2001 4:38 PM
To: dxlab@...
Subject: RE: [dxlab] DXView 1.2.8


I just tried this several times without failure. I did
"improve" the code in
this area for 1.2.7, so a regression may have been
introduced. I'll check it
out on a few other configurations and inspect the code again.

73,

Dave, AA6YQ
-----Original Message-----
From: Richard B Drake [mailto:rich@...]
Sent: Sunday, April 08, 2001 16:13 PM
To: Dxlab
Subject: [dxlab] DXView 1.2.8


Starting DXView 1.2.8 while DXKeeper is already
running fails to
establish communications between the two. One has to shut down
DXKeeper and restart it to establish the connection.

-----
73, Rich - W3ZJ
www.w3zj.com


Yahoo! Groups Sponsor

Click for Details


To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.






To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to
Re: DXKeeper 122

 

Yup, every time. I tried shutting down all other applications to
see if that had any affect - it didn't.

1) Type W7JJ into the capture window (a fictitious call sign, not
in log) and press enter.

2) Correct the callsign to W7JJK, press enter again.

3 Click "log". Nothing happens, moving the cursor to the DXKeeper
window displays a permanent hour glass cursor.

4) Shut down DXKeeper and restart, the QSO is not logged.

-----
73, Rich - W3ZJ

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Sunday, April 08, 2001 4:45 PM
To: dxlab@...
Subject: RE: [dxlab] DXKeeper 122


Hmm, I can't replicate this one either. Are you doing
anything in particular
between the first lookup and the correction to the
callsign? Does it fail
every time?

73,

Dave, AA6YQ
-----Original Message-----
From: Richard B Drake [mailto:rich@...]
Sent: Sunday, April 08, 2001 14:51 PM
To: Dxlab
Subject: [dxlab] DXKeeper 122


Dave,

I have occasionally experienced a problem with
DXKeeper hanging up
on me, it seems to get stuck in an infinite loop. It took me a
while to figure out how to reproduce it, but here it is. If I
enter a call in the capture window and press enter to
do the look
up, then later without clearing the capture window I
go back and
make a correction to the callsign and press enter again,
everything seems fine but when I go to log that QSO,
DXKeeper is
hung up.

-----
73, Rich - W3ZJ
www.w3zj.com


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.






To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to
Re: DXKeeper 122

Dave, AA6YQ
 

Hmm, I can't replicate this one either. Are you doing anything in particular
between the first lookup and the correction to the callsign? Does it fail
every time?

73,

Dave, AA6YQ

-----Original Message-----
From: Richard B Drake [mailto:rich@...]
Sent: Sunday, April 08, 2001 14:51 PM
To: Dxlab
Subject: [dxlab] DXKeeper 122


Dave,

I have occasionally experienced a problem with DXKeeper hanging up
on me, it seems to get stuck in an infinite loop. It took me a
while to figure out how to reproduce it, but here it is. If I
enter a call in the capture window and press enter to do the look
up, then later without clearing the capture window I go back and
make a correction to the callsign and press enter again,
everything seems fine but when I go to log that QSO, DXKeeper is
hung up.

-----
73, Rich - W3ZJ
www.w3zj.com


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: DXView 1.2.8

Dave, AA6YQ
 

I just tried this several times without failure. I did "improve" the code in
this area for 1.2.7, so a regression may have been introduced. I'll check it
out on a few other configurations and inspect the code again.

73,

Dave, AA6YQ

-----Original Message-----
From: Richard B Drake [mailto:rich@...]
Sent: Sunday, April 08, 2001 16:13 PM
To: Dxlab
Subject: [dxlab] DXView 1.2.8


Starting DXView 1.2.8 while DXKeeper is already running fails to
establish communications between the two. One has to shut down
DXKeeper and restart it to establish the connection.

-----
73, Rich - W3ZJ
www.w3zj.com


Yahoo! Groups Sponsor

Click for Details


To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
228381 - 228400 of 228526