开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. DXLab
  2. Messages
Expanded Topics Messages Polls
Date
Clublog Stations in SpotCollector

 

开云体育

I doubt this is possible, but thought I would ask.? Right now in SpotCollector we have “color coding” if the station is LoTW, eQSL, or both.? Is there any way to mark stations that Clublog?? This would make them easier to spot, but I doubt you can get a database from Clublog that would need to be kept updated like the ones for LoTW and eQSL.

?

Anyway, thought I would ask.

?

73, Bob KB4CL
RAT help

 

hello Dave,

it seems that the Help button on the RAT dialog does nothing.

--
73 de
Salvatore (I4FYV)
Re: QSL Labels or Cards

 

My two cents: (I'm out of town had so e minor surgery and the hospital does not really allow an Portable IT infrastructure :-) )at the moment and no DXlab at hands).
But as far as I remember, besides the orientation ( portrait vs. landscape) make sure the label ( card? ) dimensions match both in qsl config AND in Dxlabs Printer config.
Initially I had problems with those settings, because The printer specifies height/width and Dxkeeper width/height ( or so) . Initially I got confused with that. But now, it works.
In addition, to prevent those naughty margin messages, I simply set the qsl config sizes slightly lower than the actual label size and order the program to ignore printer margins.
regards Peter, DK5DC

Typos are intentionally inserted by my Ipad

Peter Glasmacher
Hallenserstrasse 40
59457 Werl

(Phone) +49-2922-950-8330
(mobile) +49-170-910-8655
-.. -.- ..... -.. -.-.
ARRL VE & DXCC Field Checker
Editor CQDL Dxtra
Re: 3-column labels and tnx qso

 

Please direct DXKeeper to make a print preview of your labels. Make a screen
shot of the print preview, and a screenshot of the Labels tab of DXKeeper's
"QSL Configuration" window. Attach both print previews to an email message,
and send it to me via

aa6yq (at) ambersoft.com

73,

Dave, 8P9RY

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 7:13 PM
To: dxlab@...
Subject: [dxlab] 3-column labels and tnx qso

Hello,

I'm trying to print same labels on avery 5960, but for some reason the tnx
QSL is getting reprinted on the top of the last qso box like on the picture
Im attaching .Is there a setting that need to be changed or that is a bug ?
I'm running dxkeeper version 13.3.1

Thanks
NX9G






------------------------------------
Posted by: Yanko Yankov <yanko@...>
------------------------------------


------------------------------------

Yahoo Groups Links
Re: QSL Labels or Cards

 

Please direct DXKeeper to generate a print preview of a QSL card. Make a screen shot of the print preview, attach it to an email message, and send it to me via



aa6yq (at) ambersoft.com



73,



Dave, 8P9RY





From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 6:12 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards





So here is my settings:




I have not gotten this to work...
When I try to print, I see the wrong paper size!


Will WC2L

On 3/5/2016 3:24 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:

The screen shot in

<> <>

Shows typical settings for printing cards "4 up". As a starting point, select a paper size that is larger than what's needed in both dimensions.

73,

Dave, AA6YQ


-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 3:17 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards

That fixes the label. I thought had checked it. I also tried it in the printer.

Now to figure out how to print on cards.
Will WC2L

On 3/5/2016 3:05 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:

Did you change the setting in the “Single Label Orientation” panel as suggested?



73,



Dave, AA6YQ



From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 2:57 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards






SO with Single label selected.
Printer set to Landscape or Portrait Printing If I set it for Height
1.1 and Width 3.2 I get "Specified column 1 offset is too larg (maximum is -2.203472 inches)" The view is still wrong. It shows the printing as horizontal. The label is shown as vertical.
If I set it for Height 3.2 and Width 1.1 I get I don't get a message. The view is still wrong. It shows the printing as horizontal. The label is shown as vertical.


SO no matter how I set it up, it fails to print correctly.

Select QSL Card:
I found a driver that seems to appear to work in other programs and gives me the QSL Card as an option. Card is setup as Width 3.5 Height 5.5. I have the printer selected, the sized selected and source selected in QSL configuration - Printer.

I have Printer QSL Cards and preview checked, I get "Specified QSL Card width is too small" essage. When the preview starts up, it Width at 10.653 x Length 8.152.

Since I can't get the DXKeeper to print labels correctly, I am guessing cards are going to be the same issue....

Will WC2L

On 3/5/2016 12:54 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:

AA6YQ comments below


-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 12:31 PM
To: ' Dave AA6YQ' aa6yq@... [dxlab]
Subject: [dxlab] QSL Labels or Cards

I was trying to get a few cards and or labels done.
When I preview a single label, it always shows the printing as horizontal. The label is shown as vertical. The printer is a Dymo LabelWriter 450.


In the "QSL labels and address labels" panel on the "QSL Configuration" window's Printer tab, change the setting in the "Single- Label Orientation" sub-panel.


I don't see the Avery 4150 as an option (labels I have).


That's a function of your printer driver.



With printing directly on the cards, it does not see the custom paper type I have added to the print engine.


That's a function of your printer driver.



If I select 3x5, all I get is different error messages depending on what I choose. I am using a Brother HL-5250dn.


Without knowing what the error messages say, one can only guess: try selecting a larger paper size.


73,

Dave, AA6YQ



------------------------------------
Posted by: "Dave AA6YQ" <mailto:aa6yq@...> <mailto:aa6yq@...>
<mailto:aa6yq@...> <aa6yq@...>
------------------------------------


------------------------------------

Yahoo Groups Links











--
William Liporace WC2L
or AR-Cluster Node telent dxc.wc22l.com or 144.93 MHz wc2l@...



------------------------------------
Posted by: William Liporace <mailto:wc2l@...> <wc2l@...>
------------------------------------


------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: "Dave AA6YQ" <mailto:aa6yq@...> <aa6yq@...>
------------------------------------


------------------------------------

Yahoo Groups Links









--
William Liporace WC2L
or
AR-Cluster Node telent dxc.wc22l.com or 144.93 MHz
wc2l@...










[Non-text portions of this message have been removed]
Re: CMD stopped after update to Commander1215

 

Configure your firewall and anti-malware applications to consider the new
version of Commander to be "safe".

73,

Dave, AA6YQ

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 7:00 PM
To: dxlab@...
Subject: [dxlab] CMD stopped after update to Commander1215

After downloading the update to Commander (commander1215.exe) all sorts of
problems.

Using Windows 7 - 64bit - 8GB RAM

If I try to click Start launch from the DXLab Launcher, only get the
spinning circle and error that DXLab Launcher (not responding).

Launching indicidual modules from with in the launcher all work with the
exception of CMD - this locks the Launcher up, Attempting to launch any of
the Commander.exe files from the DXLab&#92;Commander sub folder results in the
same locking up the folder access as well.

Unable to close the either DXLab Launcher or Commander using Windows Task
Manager . Further Start - Restart or Shutdown also locked out.
Only solution is to power PC off and on.

Suggestions?

Tom,
N4NW




If



------------------------------------
Posted by: Tom N4NW <n4nw@...>
------------------------------------


------------------------------------

Yahoo Groups Links
Re: QSL Labels or Cards

 

开云体育

The pictures didn’t display in Chrome, but they did display in Outlook.

?

???? 73,

?

??????????? Dave, 8P9RY

?

From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 6:54 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards

?



Perhaps Outlook didn't reproduce them Dave but Thunderbird did. There were 4 imbedded graphics.

73, Rich - W3ZJ

On 3/5/2016 5:39 PM, aa6yq@... [dxlab] wrote:

None of your screen shots were conveyed.
?
??? 73,
?
????????? Dave, AA6YQ
3-column labels and tnx qso

Yanko Yankov
 

Hello,

I'm trying to print same labels on avery 5960, but for some reason the tnx
QSL is getting reprinted on the top of the last qso box like on the picture
Im attaching .Is there a setting that need to be changed or that is a bug ?
I'm running dxkeeper version 13.3.1

Thanks
NX9G
Re: QSL Labels or Cards

 

I sent them direct twice. Once as a forward, the other as a PDF.

You should be them!!

Will WC2L
PDF of email

 

Another way for you to see it

Will WC2L

--
William Liporace WC2L
or
AR-Cluster Node telent dxc.wc22l.com or 144.93 MHz
wc2l@...
Re: QSL Labels or Cards

 

开云体育

I hope you get this... I was not thinking...

Will WC2L
-------- Forwarded Message --------
Subject: Re: [dxlab] QSL Labels or Cards
Date: Sat, 5 Mar 2016 17:12:29 -0500
From: William Liporace
To: dxlab@...


So here is my settings:




I have not gotten this to work...
When I try to print, I see the wrong paper size!


Will WC2L

On 3/5/2016 3:24 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:
The screen shot in



Shows typical settings for printing cards "4 up". As a starting point, select a paper size that is larger than what's needed in both dimensions.

       73,

              Dave, AA6YQ


-----Original Message-----
From: dxlab@... [mailto:dxlab@...] 
Sent: Saturday, March 05, 2016 3:17 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards

That fixes the label. I thought had checked it. I also tried it in the printer.

Now to figure out how to print on cards.
Will WC2L

On 3/5/2016 3:05 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:

Did you change the setting in the “Single Label Orientation” panel as suggested?

  

        73,

  

                Dave, AA6YQ

  

From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 2:57 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards

  




SO with  Single label selected.
Printer set to Landscape or Portrait Printing If I set it for Height 
1.1 and Width 3.2 I get "Specified column 1 offset is too larg (maximum is -2.203472 inches)" The view is still wrong. It shows the printing as horizontal. The label is shown as vertical.
If I set it for Height 3.2 and Width 1.1 I get  I don't get a message.  The view is still wrong. It shows the printing as horizontal. The label is shown as vertical.


SO no matter how I set it up, it fails to print correctly.

Select QSL Card:
I found a driver that seems to appear to work in other programs and gives me the QSL Card as an option. Card is setup as Width 3.5  Height 5.5. I have the printer selected, the sized selected and source selected in QSL configuration - Printer.

I have Printer QSL Cards and preview checked, I get "Specified QSL Card width is too small" essage. When the preview starts up, it Width at 10.653 x Length 8.152.

Since I can't get the DXKeeper to print labels correctly, I am guessing cards are going to be the same issue....

Will WC2L

On 3/5/2016 12:54 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:

AA6YQ comments below

  
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 12:31 PM
To: ' Dave AA6YQ' aa6yq@... [dxlab]
Subject: [dxlab] QSL Labels or Cards
  
I was trying to get a few cards and or labels done.
When I preview a single label, it always shows the printing as horizontal. The label is shown as vertical. The printer is a Dymo LabelWriter 450.
  

In the "QSL labels and address labels" panel on the "QSL Configuration" window's Printer tab, change the setting in the "Single- Label Orientation" sub-panel.

  
I don't see the Avery 4150 as an option (labels I have).
  

That's a function of your printer driver.

  
  
With printing directly on the cards, it does not see the custom paper type I have added to the print engine.
  

That's a function of your printer driver.

  
  
If I select 3x5, all I get is different error messages depending on what I choose. I am using a Brother HL-5250dn.
  

Without knowing what the error messages say, one can only guess: try selecting a larger paper size.

  
       73,
  
                Dave, AA6YQ
  
  
  
------------------------------------
Posted by: "Dave AA6YQ"   

------------------------------------
  
  
------------------------------------
  
Yahoo Groups Links
  
  
  
  






--
William Liporace WC2L
 or  AR-Cluster Node  telent dxc.wc22l.com or 144.93 MHz wc2l@...



------------------------------------
Posted by: William Liporace 
------------------------------------


------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: "Dave AA6YQ" 
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    
    (Yahoo! ID required)

<*> To change settings via email:
    dxlab-digest@... 
    dxlab-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    dxlab-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
    




-- 
William Liporace WC2L
 or 
AR-Cluster Node  telent dxc.wc22l.com or 144.93 MHz
wc2l@...
Re: QSL Labels or Cards

 

Is there a better way for me to send them to you?
They showed up in my email as well.
It may be a security or view setting for you.

Will WC2L

On 3/5/2016 5:39 PM, aa6yq@... [dxlab] wrote:
None of your screen shots were conveyed.

73,

Dave, AA6YQ


------------------------------------
Posted by: aa6yq@...
------------------------------------
--
William Liporace WC2L
or
AR-Cluster Node telent dxc.wc22l.com or 144.93 MHz
wc2l@...
Re: QSL Labels or Cards

 

开云体育

FYI, they also appeared on my iPhone.

73, Rich - W3ZJ



On 3/5/2016 5:53 PM, Rich - W3ZJ rich@... [dxlab] wrote:

Perhaps Outlook didn't reproduce them Dave but Thunderbird did. There were 4 imbedded graphics.

73, Rich - W3ZJ


On 3/5/2016 5:39 PM, aa6yq@... [dxlab] wrote:
None of your screen shots were conveyed.

    73,

          Dave, AA6YQ
CMD stopped after update to Commander1215

 

After downloading the update to Commander (commander1215.exe) all sorts of problems.

Using Windows 7 - 64bit - 8GB RAM

If I try to click Start launch from the DXLab Launcher, only get the spinning circle and error that DXLab Launcher (not responding).

Launching indicidual modules from with in the launcher all work with the exception of CMD - this locks the Launcher up, Attempting to launch any of the Commander.exe files from the DXLab&#92;Commander sub folder results in the same locking up the folder access as well.

Unable to close the either DXLab Launcher or Commander using Windows Task Manager . Further Start - Restart or Shutdown also locked out. Only solution is to power PC off and on.

Suggestions?

Tom,
N4NW




If
Re: QSL Labels or Cards

 

开云体育

Perhaps Outlook didn't reproduce them Dave but Thunderbird did. There were 4 imbedded graphics.

73, Rich - W3ZJ


On 3/5/2016 5:39 PM, aa6yq@... [dxlab] wrote:

None of your screen shots were conveyed.

    73,

          Dave, AA6YQ
Re: Duplicates in Stations Heard

 

That happens when the same signal is decoded on multiple frequencies. Winnabler eventually identifies the primary signal using relative signal stengths.

73,

Dave, AA6YQ
Re: QSL Labels or Cards

 

None of your screen shots were conveyed.

73,

Dave, AA6YQ
Re: UPDATE COMMANDER 12.1.5

 

Good Evening Bill & Group:

Thank you for your detailed analysis of the issue and recommended solution.

I too experienced what amounts to a failure to (complete) the upgrade operation. I do have commander in my firewall exclude list. Even though as stated earlier commander has not been an issue. It is the exclusion in the AVAST software that does the trick.

Once again kudosto Dave for the outstanding software suite and exceptional support.

Tom G, Sr.

tnx es 73 de K3SSB
Re: QSL Labels or Cards

 

开云体育

So here is my settings:




I have not gotten this to work...
When I try to print, I see the wrong paper size!


Will WC2L

On 3/5/2016 3:24 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:
The screen shot in



Shows typical settings for printing cards "4 up". As a starting point, select a paper size that is larger than what's needed in both dimensions.

       73,

              Dave, AA6YQ


-----Original Message-----
From: dxlab@... [mailto:dxlab@...] 
Sent: Saturday, March 05, 2016 3:17 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards

That fixes the label. I thought had checked it. I also tried it in the printer.

Now to figure out how to print on cards.
Will WC2L

On 3/5/2016 3:05 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:

Did you change the setting in the “Single Label Orientation” panel as suggested?

  

        73,

  

                Dave, AA6YQ

  

From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 2:57 PM
To: dxlab@...
Subject: Re: [dxlab] QSL Labels or Cards

  




SO with  Single label selected.
Printer set to Landscape or Portrait Printing If I set it for Height 
1.1 and Width 3.2 I get "Specified column 1 offset is too larg (maximum is -2.203472 inches)" The view is still wrong. It shows the printing as horizontal. The label is shown as vertical.
If I set it for Height 3.2 and Width 1.1 I get  I don't get a message.  The view is still wrong. It shows the printing as horizontal. The label is shown as vertical.


SO no matter how I set it up, it fails to print correctly.

Select QSL Card:
I found a driver that seems to appear to work in other programs and gives me the QSL Card as an option. Card is setup as Width 3.5  Height 5.5. I have the printer selected, the sized selected and source selected in QSL configuration - Printer.

I have Printer QSL Cards and preview checked, I get "Specified QSL Card width is too small" essage. When the preview starts up, it Width at 10.653 x Length 8.152.

Since I can't get the DXKeeper to print labels correctly, I am guessing cards are going to be the same issue....

Will WC2L

On 3/5/2016 12:54 PM, 'Dave AA6YQ' aa6yq@... [dxlab] wrote:

AA6YQ comments below

  
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, March 05, 2016 12:31 PM
To: ' Dave AA6YQ' aa6yq@... [dxlab]
Subject: [dxlab] QSL Labels or Cards
  
I was trying to get a few cards and or labels done.
When I preview a single label, it always shows the printing as horizontal. The label is shown as vertical. The printer is a Dymo LabelWriter 450.
  

In the "QSL labels and address labels" panel on the "QSL Configuration" window's Printer tab, change the setting in the "Single- Label Orientation" sub-panel.

  
I don't see the Avery 4150 as an option (labels I have).
  

That's a function of your printer driver.

  
  
With printing directly on the cards, it does not see the custom paper type I have added to the print engine.
  

That's a function of your printer driver.

  
  
If I select 3x5, all I get is different error messages depending on what I choose. I am using a Brother HL-5250dn.
  

Without knowing what the error messages say, one can only guess: try selecting a larger paper size.

  
       73,
  
                Dave, AA6YQ
  
  
  
------------------------------------
Posted by: "Dave AA6YQ"   

------------------------------------
  
  
------------------------------------
  
Yahoo Groups Links
  
  
  
  






--
William Liporace WC2L
 or  AR-Cluster Node  telent dxc.wc22l.com or 144.93 MHz wc2l@...



------------------------------------
Posted by: William Liporace 
------------------------------------


------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: "Dave AA6YQ" 
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    
    (Yahoo! ID required)

<*> To change settings via email:
    dxlab-digest@... 
    dxlab-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    dxlab-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
    




-- 
William Liporace WC2L
 or 
AR-Cluster Node  telent dxc.wc22l.com or 144.93 MHz
wc2l@...
Duplicates in Stations Heard

[email protected]
 

Is it normal to see between 2 and 5 entries for a single transmission in WinWarbler Stations Heard? WIthin a short time after a reset the list fills back up with dupes.


By duplicate, I mean I can see a few lines with exactly the same incoming text but often different call/with combinations. Thinking about it, think I can understand two lines each. One for station1/station2 and the other for station2/station1.


Kev/K4VD
73201 - 73220 of 229136