开云体育

-----Original Message----- Sent: Tuesday, March 01, 2016 10:52 AM To: dxlab@... Subject: [dxlab] Commander Bandspread "tolerance" This morning 3XY1T was calling CQ (split) just a hundred

-----Original Message----- Sent: Tuesday, March 01, 2016 9:09 PM To: dxlab@... Subject: RE: [dxlab] Help---Flexradio 6700 talking to Commander Dave, thanks--I will try this and advise---I

-----Original Message----- Sent: Tuesday, March 01, 2016 8:36 PM To: dxlab@... Subject: RE: [dxlab] DXKeeper pathing to network This is currently what I am doing. is there any thought to

Dave, thanks--I will try this and advise---I did print this out earlier--but was having difficulties executing. Tsk for the prompt reply--will give it a try tomorrow. Mark WC3W

Dave; This is currently what I am doing – is there any thought to allowing eQSL’s to be saved off the main computer (where DXLabs resides) and allowing us to save to a network location? I would

-----Original Message----- Sent: Tuesday, March 01, 2016 11:25 AM To: dxlab@... Subject: RE: [dxlab] ClubLog Inbound OQRS and QSL_Rcvd I don't have that box checked. aa6yq (at)

Getting there! Everything you mentioned worked well but I still don't have full understanding of how it handles a direct request. How does DX Keeper know whether the people requesting a card via OQRS

-----Original Message----- Sent: Tuesday, March 01, 2016 10:52 AM To: dxlab@... Subject: [dxlab] Re: Background colors DXKeeper Log Page Display Yes I have Spot Collector installed. Inside

---In dxlab@..., <aa6yq@...> wrote : (Comment like '18*') or (Comment like '35*')or (Comment like '70*') or (Comment like '71*') or (Comment like '101*') or (Comment like '14*') or

-----Original Message----- Sent: Tuesday, March 01, 2016 12:48 PM To: dxlab@... Subject: [dxlab] New 6700- Win Warbler Well--problem solved thanks to Dave on making Commander and the 6700

-----Original Message----- Sent: Tuesday, March 01, 2016 12:28 PM To: dxlab@... Subject: [dxlab] A difficult request to clean up and old problem There's one thing I'd love to do but

-----Original Message----- Sent: Tuesday, March 01, 2016 12:14 PM To: dxlab@... Subject: [dxlab] Re: "Inbound OQRS" greyed out OK, done. I spent a couple of hours going through the log and

-----Original Message----- Sent: Tuesday, March 01, 2016 11:45 AM To: dxlab@... Subject: [dxlab] DXKeeper pathing to network Is it not possible to save downloaded eQSL images to another

-----Original Message----- Sent: Tuesday, March 01, 2016 11:35 AM To: Alan Swinger; dxlab@... Subject: RE: [dxlab] Reload DXLab after IS Reinstall Dave - I spoke too soon. Download from

Well--problem solved thanks to Dave on making Commander and the 6700 talk. My next task was to get CW Skimmer working--turned out I had to download another program SDR-Bridge to make that work. My

There's one thing I'd love to do but honestly I don't know if it's possible or feasible. As you know, I converted my entire log from DX Base format three years ago, and that program has a bizarre way

OK, done. I spent a couple of hours going through the log and getting rid of two classes of bad QSL entries; those with "N" that shouldn't have been and those with "Y" that were never, in fact, QSLd

Please forgive fat fingers that was supposed to say 18.068126 :-( 73, Rich - W3ZJ http://www.w3zj.com

Just worked him 17M at 10.068126 (126 Hz inside the band) all the spots I see for him in 12M show he is on or slightly above the band edge. 3 of the 12M spots were from reverse beacon stations that

Is it not possible to save downloaded eQSL images to another server or location on my network? I attempted to access the network using QSL config, then chose to browse to the network path I would like