开云体育

-----Original Message----- Sent: Sunday, February 28, 2016 2:40 PM To: 'Dave AA6YQ' aa6yq@... [dxlab] Subject: RE: [dxlab] DXCC Verification Discrepancy resolution how-to? Thanks for the

From: dxlab@... [mailto:dxlab@...] Sent: Sunday, February 28, 2016 2:35 PM To: yahoogroups Subject: [dxlab] NEW inbound OQRS Dave,I used the new inbound OQRS feature with my

Hi Dave. Thanks for the quick reply. I am in good shape now. Most of the “V”erified were from my first DXCC card submission. I went through that submission way back when and manually marked them

Dave,I used the new inbound OQRS feature with my personal callsign last night. It worked very well. Now I have a question. Most of the callsigns I manage are in my personal clublog page as separate

How did you generate the DXCC progress that you included in your message below? 73, Dave, AA6YQ Sent: Sunday, February 28, 2016 2:08 PM To: dxlab@... Subject: [dxlab] Isle of Man DXCC Hi,

Please follow the directions in http://www.dxlabsuite.com/dxlabwiki/FlexSignature specifically, 1. Do not start SmartCAT – it is not used 2. Initially, leave the IP address and Port boxes empty 73,

From: dxlab@... [mailto:dxlab@...] Sent: Sunday, February 28, 2016 1:42 PM To: dxlab@... Subject: RE: [dxlab] Commander Randomly Not Synching With Rig OK. I'm just

Hi, I noticed that the DXCC "Isle of Man" is not in my DXCC progress but I can see it in my IOTA Progress any help is welcome 73's Phil callsign GD0TEP ID = GD IOTA = EU-116 Code = 114 Band 30m PSK31

HOLD UP HOLD UP---I GOT IT TO WORK--THANKS DAVE----WENT BACK AND READ ALL INSTRUCTIONS AGAIN--THE KEY WAS IN SMART CAT TO PUT PORT SETTING TO 4992 (IT WAS 5002) THAN BACK AND PUT IN CONFIG THE IP PORT

Well, i tried your suggestions Dave but still unable to connect Commander to the Flexradio 6700. The changes that I made per our instructions were 1) Put IP address and IP Port into empty boxes

OK. I'm just reporting that there is difference, at least on my PC, between older and newer versions. I have operated this way with 3 different PCs over the years without a problem. I'm not

Serial port connections should not be expected to survive a sleep/wake cycle. 73, Dave, AA6YQ Sent: Sunday, February 28, 2016 11:59 AM To: dxlab@... Subject: [dxlab] Commander Randomly Not

No, this is a real RS232 connection, not through a USB converter. I am well aware of those problems. Again I have used this setup for 12 years with no problem until these latest versions. The older

Open question yet ... certainly not as an exhibitor. 73, ... Joe, W4TV

This is not a Commander issue. It is known problem with many USB serial drivers ... they do not "wake up" properly once the USB port has been powered down. You will need to adjust the Windows Power

I only occasionally update Commander, as it has worked perfectly with my old Yaesu MP Field for many years. Starting with version 12.0.8 I noticed that sometimes the RS232 ports would not synch up

thanks Joe.....good to see you in Orlando, will you be at Dayton?

You failed to perform a "Recompute" on the log as instructed following the last DXCC Database update. Select the "Check Progress" tab and click the "Recompute" button in the center of the bottom row.

the DXCC field is blinking red, wont let me choose FR ?!?!?!?1

Something is up with eQSL as yesterday AM it was completely offline, no way to access the site or anything. Maybe they are upgrading?? I have not tried anything with them for about 24 hours except I