开云体育

After the original failure due to the MS upgrade to vers 2004, I have restored my PC to "as-delivered" status using the recovery partition. Just finished installing my DXLabs applications (all of

Gregg The software has several methods for selecting antennas and band filters, surely one of them matches your requirements: By BCD output from your rig (ugh - does anybody do this anymore?)By Band

This release * corrects a defect in SpotSpy's alert feature for DXCC alerts (tnx to Bruce, K5WBM) * updates SpotSpy's clubmember databases (tnx to Rien, PA7RA) * corrects some minor defects The

Larry: That is a great solution. I'll give it a try. I was looking at the device panel capabilities in Commander as it has the capability of switching based on band segment ie switching in a matching

The thought is to have an Arduino on the network the that is listening on a specified UDP port. A device tab in Commander would be configured to send as an example AUX1 for a specific frequency range.

Hi, Gregg I wrote software and built a band decoder that uses RadioInfo UDP packets from both DXLab's Commander and N1MM+ to control my antennas and bandswitches. The software works seamlessly when

+ AA6YQ comments below Frequency info as configured on the device tab. I'd like to use it not only to control remote antenna switches but also remote matching networks. + "Frequency info" is not a

+ AA6YQ comments below Relative newbie here to DXL/WW/7610/RTTY. Have been using this combo for about 18 months and slowly developing modest competence with a small subset of overall capabilities.

Frequency info as configured on the device tab. I'd like to use it not only to control remote antenna switches but also remote matching networks.

+ AA6YQ comments below I'm building a wireless antenna control switch and I was wondering if there is a method for sending AUX info over the UDP Network Service. + What is "AUX info" in this context?

On 20/06/2020 17:35, Rick Boswell wrote: > > Relative newbie here to DXL/WW/7610/RTTY. Have been using this combo for about 18 months and slowly developing modest competence with a small subset of

Hi RIck. If your radio has a USB port like the IC-7300 and many others. You can just use a USB cable.? You also have to install the drivers for the sound card. If you want to use FSK,? then you may

Relative newbie here to DXL/WW/7610/RTTY. Have been using this combo for about 18 months and slowly developing modest competence with a small subset of overall capabilities. Have had digital modes

Dave: I'm building a wireless antenna control switch and I was wondering if there is a method for sending AUX info over the UDP Network Service. If not, is this something that could be implemented?

Dave, you must be reading my mind.. when I was first getting my TS440s working on FT8 I had it successfully configured the way you suggested but not on the same computer that I've been experimenting

+ AA6YQ comments below I operated portable from KP2.....as KP2/WW3S.....do I need to request a separate certificate + Yes, because KP2 is not in the same DXCC entity as WW3S. You'll also need a

You need a separate certificate for every call sign you use. You can request a certificate for the KP2/WW3S call sign using the certificate for WW3S as authentication. 73, Rich VE3KI

+ AA6YQ comments below Thanks Dave, I had a feeling that I was attempting something that isn't possible, now I understand more the "why not" thanks to your clear explanation. I will say that I learned

I operated portable from KP2.....as KP2/WW3S.....do I need to request a separate certificate, or do I assign a separate station location under my regular call?

Thanks Dave, I had a feeling that I was attempting something that isn't possible, now I understand more the "why not" thanks to your clear explanation. I will say that I learned a lot more about