+ AA6YQ comments below
I rebooted Windows 11, with no improvement.
+ OK. Please do the following:
1. on the General tab of SpotCollector's Configuration window, check the "Log debugging info" box
2. terminate SpotCollector
3. start SpotCollector
4. wait until at least 5 new Spot Database Entries are created for stations operating on 80m through 10m
5. on the General tab of SpotCollector's Configuration window, uncheck the "Log debugging info" box
6. attach the errorlog.txt file from your SpotCollector folder to an email message, and send the message to me via
aa6yq (at) ambersoft.com
73,
Dave, AA6YQ
From:
[email protected] <
[email protected]> On Behalf Of Stephen Rabinowitz via groups.io
Sent: Monday, March 31, 2025 7:42 PM
To:
[email protected]Subject: [DXLab] SpotCollector SPProb
The short path probability box on the Spotcollector 9.8.3 main panel has no entries, as it used to do. I don't know what I changed to cause this. On the configuration general tab, in the Propagation Prediction panel, the enable SNR box and for all stations boxes are checked. The default required SNR is set to 0 db. PropView 2.0.7 is open. On the config prediction tab, all bands except 60m are selected. The required SNR for CW is 10, for SSB 20, for FT8 -24.
What am I missing?
73, Steve K2SN
