Attachments are not conveyed here due the limitations of the free list.
A direct connection between transceiver and amplifier is not supported
by DXLab Suite. If you are using that connection, please seek help
from Icom or one of the Icom support lists.
73,
... Joe, W4TV
toggle quoted message
Show quoted text
On 2025-03-20 4:55 AM, Shigeru Ohsawa via groups.io wrote:
________________________________
差出人: [email protected] <[email protected]> が Joe Subich, W4TV via groups.io <lists@...> の代理で送信
送信日時: 2025年3月20日 11:52
宛先: [email protected] <[email protected]>
件名: Re: [DXLab] IC-PW1 configuration in DXLabCommander
On 2025-03-19 10:06 PM, ji8bxb.jj1bcm.shige via groups.io wrote:
> Is this connection method not acceptable?
No, it is not. For DXLab Suite to control a PW-1 you must use the
following configuration:
<>
73,
... Joe, W4TV
On 2025-03-19 10:06 PM, ji8bxb.jj1bcm.shige via groups.io wrote:
Dave, W6DE
One is from IC-7600 (REMOTE terminal) to CT-18 to connect to PC. The other is to connect IC-7600 and PC with USB cable.
Is this connection method not acceptable?
Shige, JJ1BCM
Joe, W4TV
My explanation was not adequate.
As shown in the attached diagram, the PC is connected to the IC-7600 and IC-PW1.
In this state, IC-PW1 cannot be controlled well.
Shige,JJ1BCM
