Dave, W6DE
As shown in the attached figure, the PC is connected to the IC-7600 and the IC-PW1.
I cannot control IC-PW1 well in this condition.
Shige, JJ1BCM
You will need a second CIV connection path for DXLab Commander running in the computer to communicate with the PW1.? Do you have a second
CT-18 or other way to connect your computer to the PW1??
See the connection diagram in this article.
?
73,
Dave, w6de
?
toggle quoted message
Show quoted text
From:[email protected] <[email protected]>
On Behalf Of ji8bxb.jj1bcm.shige via groups.io
Sent:?19 March, 2025 23:07
To:[email protected]
Subject:?Re: [DXLab] IC-PW1 configuration in DXLabCommander
?
Thank you, Dave.
?
>Leave the PW1 address at 71 and the 7600 address at 7A.
IC-PW1 address at 74(DXLab's “Controlling an Icom PW1 Amplifier” instructs to set the address of IC-PW1 to 74.).
IC-7600 address at 7A.
?
>With the accessory cable and CIV cables directly connected between the PW1 and the 7600
can you successfully Sync the PW1 and 7600 together?
IC-7600 controls IC-PW1 perfectly.
?
Shige, JJ1BCM
?
