Re: IC-PW1 configuration in DXLabCommander
|
Now connect your computer to the 7600 and connect your CT-18 up to the 7600 and use DXLab Commander to control the 7600—still
ignoring the PW1, don’t connect the 7600 to the PW1 with the accessory or CIV cables.
?Can you now control the 7600 from Commander?
?
73,
Dave, w6de
?
toggle quoted message
Show quoted text
From: DXLab@groups.io
<DXLab@groups.io> On Behalf Of ji8bxb.jj1bcm.shige via groups.io
Sent: 19 March, 2025 23:07
To: DXLab@groups.io
Subject: Re: [DXLab] IC-PW1 configuration in DXLabCommander
?
>Leave the PW1 address at 71 and the 7600 address at 7A.
IC-PW1 address at 74(DXLab's “Controlling an Icom PW1 Amplifier” instructs to set the address of IC-PW1 to 74.).
>With the accessory cable and CIV cables directly connected between the PW1 and the 7600 can you successfully Sync the PW1 and 7600 together?
IC-7600 controls IC-PW1 perfectly.
|
Join DXLab@groups.io to automatically receive all group messages.
