-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of Dave AA6YQ
Sent: Wednesday, June 19, 2024 4:38 PM
To:
[email protected]Subject: Re: [DXLab] Spotcollector Webserver Problem
+ AA6YQ comments below
I have just got my DX Cluster (ZS2EZ-3) back up and running after a couple
of weeks down - now have a Fixed IP on my Fibre Line (was using No-IP
service) and have a parked domain pointing to the IP address. Working well
with the cluster.
I am trying to set up an old laptop running Windows 10 to connect to the
cluster and provide a Web Interface via SpotCollector.. I used to have a
similar setup running once before , but now every time I try to connect to
the SpotCollector Webserver I get "GET is not supported"
I have the SpotCollector Web Server Port set to 8001, 25 spots per page and
a Refresh interval of 1 minute. I have port 8001 on my router forwarded to
the laptop running SpotCollector which is picking up spots from the Cluster
perfectly. I even tried connecting via 127.0.0.1:8001 on the laptop and got
the same "GET is not supported"
+ The message "GET is not supported" is not generated by SpotCollector.
+ Here, the IP address of the PC that hosts SpotCollector is
+ 192.168.88.238
+ From any other device connected to our home network, this URL accesses
SpotCollector's Web server:
192.168.88.238/spots
+ From a device with a small screen - like a smartphone - use
192.168.88.238/smallspots
I am at a loss - what am I doing wrong??
+ My guess is that you're not connecting to SpotCollector's web server.
73,
Dave, AA6YQ
