+ AA6YQ comments below
I have just got my DX Cluster (ZS2EZ-3) back up and running after a couple of weeks down - now have a Fixed IP on my Fibre Line (was
using No-IP service) and have a parked domain pointing to the IP address. Working well with the cluster.
I am trying to set up an old laptop running Windows 10 to connect to the cluster and provide a Web Interface via SpotCollector.. I
used to have a similar setup running once before , but now every time I try to connect to the SpotCollector Webserver I get "GET is
not supported"
I have the SpotCollector Web Server Port set to 8001, 25 spots per page and a Refresh interval of 1 minute. I have port 8001 on my
router forwarded to the laptop running SpotCollector which is picking up spots from the Cluster perfectly. I even tried connecting
via 127.0.0.1:8001 on the laptop and got the same "GET is not supported"
+ The message "GET is not supported" is not generated by SpotCollector.
+ Here, the IP address of the PC that hosts SpotCollector is 192.168.88.238
+ From any other device connected to our home network, this URL accesses SpotCollector's Web server:
192.168.88.238/spots
+ From a device with a small screen - like a smartphone - use
192.168.88.238/smallspots
I am at a loss - what am I doing wrong??
+ My guess is that you're not connecting to SpotCollector's web server.
73,
Dave, AA6YQ
