I get back 2 of 733 QSOs are already uploaded; aborted No QSOs were
processed because some were duplicates or invalid.
It's likely that those 2 QSOs were in your test upload.
On the QSL ->LotW tab, click the "QSL Config" button and check the
"Permit uploading of QSOs already uploaded to LotW" box.
This setting will automatically be cleared after the first upload.
73,
... Joe, W4TV
On 2020-04-09 9:17 AM, Tom Brown wrote:
I'm getting closer but not a winner yet.? Any ideas?
I've reimported with the Station, Operator and Owner Call: N0S, N0FY, N0FY
There were still problems as it wouldn't recognize N0S.
I went back to TQSL and generated a Station Location with the N0S certificate (new from before)
Then updated QTH tab with the Location and call for this operation
Then filtered log by this QSO party
Then did the Station Location replace in My QTH
Did a test upload of several Qs using the right mouse click on the Log window and they went fine.
Added all of these to the Que and did an Upload to LotW operration
I get back 2 of 733 QSOs are already uploaded; aborted?? No QSOs were processed because some were duplicates or invalid.
How to fix??
