开云体育

Hi Ron, I won't be at Dayton but would you still be willing to sell it with shipping? Jim KD0WF

I notice that the manual seems to be slightly unorganized but not bad. It's all there and it's not that many pages so that's fine. Like I said, I really need to reread the entire manual. I wish I

It’s well after the actual alignment procedure. It’s strange that it is where it is. 73, Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent from Proton Mail for iOS

Hello Rick, I have both.. To: "DRAKE-RADIO" <[email protected]> Sent: Wednesday, May 17, 2023 8:12:34 PM Subject: Re: [DRAKE-RADIO] TR4-CW Service Bulletin

I see now where other places in the manual refers to zeroing the S-Meter as setting it to the "1". I should read the entire manual! Just curious where the procedure you outline is defined in the

on the rear, next to the SENSITIVITY adjustment is the S METER CAL (R67). You turn down the RF Gain as much as possible and set the meter for S9+60 or the right peg -- whichever comes first :-) I

There's R-48 (RF GAIN) and R-24 (S METER ZERO). What's the third component? Thanks, Barry - N4BUQ

If you can set all three within the adjustment ranges of the pots then you have a good set. One of the 2-B's that I'm in the process of completing had an RF GAIN pot that was at 28M (surprisingly, my

That was what I suspected was the case and I set it there but thought I'd check with the group to be sure. Thanks, Barry - N4BUQ

Yes. Set for S1. 73, Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent from Proton Mail for iOS

Sheesh A tr4 is < 20 lbs.…..it aint no $2000.00 rig in anyone’s world. Whoever does your shipping, stik with them. $25 might have gotten 20lbs across the CONUS but not in my current lifetime if it

I would wait until the correct tools arrive before adjusting any transformers or inductors. The cores are fairly delicate. 73, Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana.

Gary, what sort of paint do you use? 73, Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent from Proton Mail for iOS

I have shipped TR-4’s. They all weigh the same and are the same physical size. I can assure you that shipping will cost in excess of $25 just for the shipping charges. Like everything else, the cost

And they have 6AU6's in them? Hey, You got an antenna for 75/40 up yet? -- *73/Rick* *WA6III * * Every post is created using Linux * *

I have tube boxes that are factory printed 6EV7 6FQ7 To: "DRAKE-RADIO" <[email protected]> Sent: Wednesday, May 17, 2023 12:28:33 PM Subject: Re: [DRAKE-RADIO] TR4-CW Service Bulletin

For setting the receiver gain in a 2-B, the manual states to zero the S-Meter. Is that supposed to be "1" on the dial? I know 0 != 1, but the meter doesn't have a zero on it. Is it possible that zero

I found I have the MSDS for Tuner-Lub.? Its plain old Vaseline.? Many years ago Boonton Radio published some testing they had done on the oscillator turret switches on the Q-Meter and RX-Meter.?

That should be good enough. It's a digital circuit so it either works or not. If it locks properly across all bands I wouldn't bother. 73 -Jim NU0C "jerry-KF6VB" <jerry@...> wrote:

I also have gotten great results with a roller on Drake and Heath radios that did not have a smooth satin finish. The late TR7’s had black cases anyway so it’s pretty authentic to use satin black