The same problem can arise with a
DIN socket. Poking a piece of copper wire into
each pin-socket in turn and using a hot iron quickly on a clean
tag worked well.
Michael 2E0IHW
On 10/04/2021 18:04, Evan via groups.io
wrote:
toggle quoted message
Show quoted text
One "trick" I have ?used is to put a "heatsink clip"
(pointed nose) on each pin that I soldered and that seemed to
help. ?I clipped it on the base if there was room, from ?the
end if there wasn't. ?Worked for me.
Evan, K9SQG
