1.2 GHz DD has significantly less coverage than the 1.2 GHz DV mode. The
signal is lower power and spread into about 50 times the width of the DV signal.
Is there a standard 'microvolt' signal value for 1.2 GHz DD links that
would give reasonable simulations using Radio Mobile Online?
For wifi Mesh planning, using this chart :
- a weak but sometimes
useable -80 dBm signal is 22 microvolts. Where would planning
for a system using ID-1's in data mode go on the chart?
Thanks,
Bill - WA7NWP
