|
Today is 4 Weeks.....
8
Well today is 4 weeks so hopefully my zBitx will ship in the next few days....I've ordered all the support hardware (batteries, BNC coax, etc). I already have lots of other support since I own a KX2. Looking so forward to playing with this radio. I have a friend who has the sBitx (big brother) and I was quite impressed with it. -- "POWER, WE DON'T NEED NO STICKIN' POWER" - EVERY KX2 OWNER Always respect the airwaves, 73 de KI7PBR, Gary
|
|
ZBITX Receive issue.
4
So I recently received my Zbitx and I think I have a problem. The receive is terrible. I can¡¯t make out anything on it even trying the WWV freqs I can¡¯t hear anything but a sort of ¡°chuh chuh chuh¡± sound that¡¯s continuous. I¡¯ve adjusted the IF and volume as well as bandwidth but it makes no difference. If there something I¡¯m missing or did I receive a faulty unit? Any and all help is appreciated. Video attached to show sound being heard.
|
|
TSW T4.1 Raduino Kits - Unbuilt For Sale
2
I have two TSW T4.1 Raduino Kits, for uBITX v6, unbuilt for sale. $25.00 each or both for $45.00 + cost of USPS Priority Mail shipping, from SC, to US addresses only. PAYPAL only. Link to BITX20 Groupsio message thread referencing PDF of TSW T4.1 build instructions (scroll down to message #112110: https://web.archive.org/web/20220421175204/http://www.w0eb.com/ NOTE: - Kit DOES NOT include Teensy 4.1 (must use one with headers pins NOT installed), display (use display from uBITX v6 or purchase separately) or RTC battery. - You will need to able to use the Arduino IDE to load firmware onto the Teensy (I cannot supply the firmware so you will need to download yourself). These kits are supplied in the unopened bags they were shipped in from TSW. Dennis KG4RUL
|
|
N8ME uBITX 6 Firmware V 0.2
10
After a two year hiatus, I have updated my N8ME firmware for the uBitx v6 to version 0.2. Among other things, this incorporates some of the bug fixes from the VU3GAO update. The updated firmware can be downloaded or cloned from my github account. https://github.com/microenh/N8ME-ubitx The repository is designed for building and installing with VSCode and the PlatformIO extension. However, the src folder contains a src.ino file that can be used to build and install the firmware with the Arduino IDE. There is an updated PDF manual in the repository that shows how to use WSJT-X to do a frequency calibration. This is released without any warranty. Please let me know of any issues. -- 73, Mark, N8ME
|
|
#zbitx I am intereted in CAT control of the zBitx.
10
#zbitx
My radio does not arrive till Monday! I am interested in some modes that are not installed on the radio. I want to test with DigiPi too. (YES, adding another Pi) What radio does the CAT port respond to? For Hamlib as an example. 73 KE9A
|
|
Hello I received my zBITX in their 2nd shipment release a few days ago. I have linked it to my WiFi, an easy task. It's internal clock should be locked and on time now. I then went on 20m to make a single FT8 test and was successful to work a station, that you can see in the Logbook image. What I am confused about is the TIME that is recorded in the integral Logbook. The Logbook display shows what I think is the time as "32:29". See attached image. On the PI screen that I displayed on my HDMI monitor it does show a correct time of 194915 as "194915 13 -04 1647 - WB4KTF AJ5S EM42", see attached image. So why does the logbook show this odd 32:29 for time? Are we supposed to EXPORT the logbook to see the correct time of the QSO? -- Glen, WB4KTF, Austin, TX
|
|
Can't find who posted this PS but it works very well! Straight plug and use on the zBitx. HFSignals would do well to offer this model as an option. Ronny W4TRI https://www.amazon.com/dp/B06XYHTHGL?ref=ppx_yo2ov_dt_b_fed_asin_title
|
|
Has anyone used the batteries like on the SbitX that use the XT60 connection. Yes I know its different but they do have adapters or I can make one to change from XT60 to 5.5/2.1. I know the ones I looked at are 7.4V and around 5000ma. Thank you Jim KE0VVu
|
|
zBitx Hardware Calibration (Reduce IMD and spurs)
I know there are are a fair amount of new people here who may not know about some tools that I've developed. Here is one that can make it easier for you to calibrate your hardware. https://github.com/drexjj/sbitx/wiki/sBitx-Hardware-Calibration#zbitx-model -JJ
|
|
To find the root cause of the spurs, I worked in 2 steps: 1. I took the front panel board out of the case and connected it with jumper wires to the main board. My objective was to eliminate possible EMI from the Pi Pico into the RF board. This did not make a difference for the spurs, as they just went down by 0.5dB which is the resolution of the TinySA. 2. In the si5351v2.c code I changed 8MA to 2MA. This results in approximately 5dBm less output power (33.5 vs 38.1dBm) but also a relative reduction of the spurs by approximately 7.5dB from -28.1dBc to -35.6dBc: Reduced output power is most probably due to the fact that the zBitx uses a diode ring mixer instead of the KISS-Mixer used in the sBitx and the oscillator power to the ring mixer is provided directly by the SI5351 CLK2 output (in reality an MS5351). Also, the IF diode ring mixer gets its oscillator signal directly from the SI5351 CLK1, whereas in the sBitx there is a buffer amplifier with two 2N3904. It could be that the much higher load on the SI5351 outputs, results in some intermodulation in the SI5351, which finally shows up as spurs. Given that these spurs are a showstopper, to transmit with the zBitx as the spurs are not at least 40dB suppressed, I am looking forward to further investigation and direction by hfsignals. On Mon, Apr 14, 2025 at 11:39 PM, Ron, N6YWU wrote: -- 73, Joerg - DB2OO
|
|
Magic
2
My SBitX was on at home in FT8 mode, I was 30 miles remote with my ZBitX, made two contacts from the remote location with FT8. Both ZBitX contacts show up in my SBitX log! The ZBitX has not been powered on since I got home. Can anyone explain what and how this this happened? Tim W1WCI
|
|
Alamogordo Amateur Radio Club's 39th Annual Hamfest 30 Aug 2025
2
ALAMOGORDO AMATEUR RADIO CLUB'S 39TH ANNUAL HAMFEST ARRL SANCTIONED 30 Aug 2025 Otero County Fair grounds (in Alamogordo NM) 7am to 3pm-ish Admission: Free!!! Vendors can set up day before 3 to 7pm Pre-register for Tables and prize tickets. Tables are $15.00 ea (if you have your own table and chairs $6.00 each table space) Electrical at most of the table locations but not all. Pre-register so we can get a good table count. Prize drawing tickets postmarked before 23 August $8.00 (pick up at event) If you cannot make it, tickets will be added to Main Prize drawing. Prize tickets at the door $10.00 Tickets postmarked before 23 August will be eligible for a pre-registration prize $50.00 cash. 1st Prize winner responsible for shipping or pick up at event. 2025 Prize list 1st FT710 AESS 2nd FTM-150R 3rd Mini 1.3 OLED Zumspot 4th DM-30TR There is a $1.00 Ticket drawing for a FT-4XR Looking for folks and groups to give presentations, let us know what ya can do Other Door prizes from Amateur Radio Related and local vendors, drawn throughout the event. Plenty of parking, RV's welcome, no hook ups but there is a dump station on site ARRL License testing will be conducted at 9am-ish. Please Bring a photo ID or 2 other forms of ID. FRN must be provided. FRN can be established by registering with FCC Check K5LRW website, for latest changes www.qsl.net/k5lrw/hamfest.htm Pre-register by Mail: Contact Hamfest Committee Chair Alamogordo Amateur Radio Club Rusty KI5RUS rjaskolo@... HAMFEST 2025 575-491-3631 call or text 12 Main St#383 Or Rick KB7SQF rick@... La Luz NM, 88337 Hamfest Committee member E-mail_____________________________ Ph#_________________________ Name______________________________ Call_________________________ Address________________________________City__________________St/zip__________________ Make Checks payable to AARC and include your callsign on Check Prize Tickets Before 23 Aug. at $8.00 x______=$__________ Tables at $15.00 x________=$________ your own $6.00x_____=$________ Dinner(pay as you go) How many?_____________(Location TBA) Testing or upgrading : Technician / General / Extra (Circle one)
|
|
FS - SBITX V3
I have a mint SBITX V3 with 64 bit OS for sale. Used as receiver only. $300 plus PP fees and shipping. CONUS only. Jeff K2SDR jkelly at verizon.net
|
|
sBitx v3, just installed new MOSFETS and no output
3
#sBITX_v3
Please disregard. Although no "wizz" at troubleshooting, it occurred to me that I'd been using a bench supply that is only 2A at 12V! Connected up a 4A one I had on a shelf behind me and RF out! Not the first time I've had a "duh" moment, nor will it be the last. 73 All, John N2LCX
|
|
ZBitx frequency deviation!
zBitx frequency deviation! Can the frequency deviation be corrected?
|
|
Build Instructions for ZBitx Front Panel Software?
5
I tried to build the software for the Raspberry Pi Pico. There are a couple of things missing: The TFT_eSPI library needs a User_Setup.h file that describes the interface and the type of display that's used and the folder with the code has a file called Read_Me.ino that references a file called platform_local.txt which does not exist in the sketch folder. Are there official build instructions for the front panel software? If not, anybody willing to share their unofficial build instructions? Thanks, Karl Heinz - K5KHK
|
|
zBitx restarting when doing FT8, at Transmit time
5
I have tried different power supplies, all capable of more than 3 amp. Same results. Tried reducing Drive down to 65, that appears to work, but at 70 it resets the Pi consistently. It does it very quickly, so not temperature related. Any suggestions? Software updated as of April 29th 2025
|
|
The modified ft8_lib available at https://github.com/gdyuldin/ft8_lib , and it offers a better handling of nonstandard callsigns . However, I wasn't able to simply use it as a replacement of the original ft8_lib sources in the sBitx or zBitx firmwares. It looks like certain non-trivial integration work is needed. Unfortunately, I won't be able to take a look at that before the half of July. Has somebody else succeeded to replace the original ft8_lib in [s/z]Bitx with that improved version? 73, Wojtek SP5DAA
|
|
sBitx-v4301-PiZero-SD-IMG
6
Hello, when I follow the link via wiki and git, proton says no file avaliable. Did I follow wrong link or is the img not more to download? Please advice. 73, Michael
|
|
Access zBitx like a HL2
6
Hi Is it possible to use the zbitx as if it was a Hermes Lite 2 (HL2)? I've searched and maybe It can, and maybe my search terms not correct as I'm a new HAM. Thanks
|
Image Name
Sat 8:39am
Sat 8:39am