开云体育

Hello Sam, The file is stored in a zip file.? Try extracting the image and creating a microSD card with the extracted file after you rename it to remove the extra .img at the end. It should be

Sorry, Restarted everything and downloaded the .lmg again. It is writing.....fingers crossed. Thanks, Sam Hanie samhanie@... 623-219-8130 [email protected]> wrote:

What a wonderful “problem”!! Gordon kx4z

Excellent! Greatest congratulations! The code sounded wonderful! ?Seems that the pie 02W is able to do this well. great work! gordon kx4z

TRIED THIS .IMG FILE. GIVES ERROR (SEE IMAGE). Thanks, Sam Hanie samhanie@... 623-219-8130 [email protected]> wrote:

I had to replace the OTG usb adapter to get the key board and mouse to work reliably. Tim W1WCI Sent from me and my iPad

Tilman, You can download a copy of the zBitx SD card image from this link: https://drive.google.com/file/d/1jpcgWAclM6i2csNBxPCs3Q1CK_7ma5UC/view?usp=sharing Hope this helps. 73, Ragav

I recommend that if you add a mouse, keyboard, or monitor, *you restart the device* , because the built-in SBC (single board computer) is simple and very stupid and will only recognize external

I'm looking at? it from a backup restore perspective. Leo, AI5Ii

With sbitx, it is worth booting from an external USB 3 because there is a speed difference. Here, the RPi4 also boots from the uSD card on the pcb, while the uSD has a speed of 30 MB/s, while the

Congratulations on solving the problem and I wish you many nice DXs. If you don't like to solder, I recommend using a power supply with current limitation. It's likely that the previous owner forgot

I follow what you are saying.? However the sdcard in the zbitx is? internal. I was hoping that a sdcard in a card reader in the USB port can be booted instead of booting from the internal

Since the rig is pre-soldered, he can't be smoking flux!

If you want a quick answer, copy the uSD card from the working system (you can do it with an SD card reader) and then swap the two cards. Due to the small size, booting from an external USB increases

Anyway, having a "shutdown" button in GUI that does power off, could be a good idea to minimize the risk of filesystem corruption... 73, Wojtek ?r., 2 kwi 2025, 08:08 u?ytkownik WZab - SP5DAA via

Just for the sake of argument, let's say I do something stupid and my zbitx will no longer boot. But I have done a SD card copy to an external usb with new UUID. How do I boot from the USB so that I

Hi Tilman, What are the properties of the /home/pi/sbitx/sbitx ? Can you execute: 'ls -l /home/pi/sbitx/sbitx' and send the result? Maybe you have done something via sudo and changed the ownership of

Deard Ashhar Yet another try. I must admit that my patience is at its limits now with the zbitx.... Anyway, tried and followed your instructions. Here the results: *pi@sbitx:~/sbitx $ git checkout

I have fixed the two issues of zbitx on CW. The new update has good keying with Iambic keyer and the cw decode noise is now gone as well. To get this update, you have to: 1. Flash the new firmware

Interesting would it be possible to get a correct instruction on how to Build a ”fresh image” for a zbitx? My radio defenitly is unusable now. Im having trouble to recomend bying one to fellow