开云体育

Ashhar, thanks for bringing the uBITX to the world. A quick question - I ordered and paid for one on Sat, 9/12/17. I haven't received any comms about it so far. Do I need to enquire about it ? or just

RCA connectors are readily available, inexpensive, and work quite well. _._

Wicker (call sign?) wrote... I don't know why hams are "stuck" on the inferior PL-259 plug and SO-239 socket. Well, I do. It's because manufacturers keep sticking them on the back of radios and we

While waiting for my uBITX, I decided to try to come up with a way of mounting the main circuit board at the rear of a metal case so I could use the rear panel as a heatsink for the two IRF510's (with

I got both ant connectors on my case. I used the small Jameco black and white enclosure.????? It is almost too small.? You drill either the biggest drill you have and file. Or, go around inside

/g/BITX20/topics

I just ordered my uBITX which as I understand is back ordered.? When I get it and get it assembled, I will be designing a 3D printed case for it.?? Also I hope that we will soon see a place for

The rotary encoder that came with my uBITX does not have mechanical detents. It is free-running. Rotary encoders that I got earlier from Ebay vendors look the same but they do have mechanical detents.

Ashar Farhan, These have your name on them if I can find a way less expensive than the cost of a ?BITX to ship them to you. Which I haven’t found. Craig KM4YEC

We'll have to see if we have enough pico-acres available, but we already have the code for it available from a signal generator project. Jack, W8TEE

It amazing just as it is!! Been listening to 40M CW while I work on some photos I took. I swear the receiver is as good as my FT-1200. Jack, W8TEE To: [email protected] Sent: Wednesday, December 13,

Jack, really interested when you get the uBitx boards available.

With a keypad on the screen for direct frequency entry?

Whit your TFT interface, his could be a real winner... Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner

all sounds good, except I would rather have a froont firing speaker. don't know what the group thinks about that, but remember how good they sounded?

Thanks Jack! I am very enthusiastic about the possibility. That would be a capability I could not otherwise afford. And a great learning experience trying to assemble it without letting out the magic

You can make an encoder free running like a pot, just remove the ball. I did it with an encoder that I use to tune my PC with HDSDR. Phil - G7BZD jjpurdum@...> wrote:

The really cheap SDR dongles (meant for DVB-T television reception, $10) can get down to 30mhz without a downconverter (as I recall). They only have an 8bit A2D converter, so reception with the uBitx

That's the reason for the additional horsepower. I will admit that I'm getting into an area of development that's new to me, but one that I'm very excited about. The goal is a 5" panadapter

Jack Any possibility of getting the waterfall display functionality into your next revision of W8TEE TFT? It would make the uBitx a wonderful piece of kit for family outings. -John