¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Expanded Topics Messages Polls
Date
Re: Github's future?

 

Fortunately, the way git (the software used by github) is structured, it doesn't really need a server! git is a distributed source control system. that said, it does have? server mode that can quickly be setup anywhere on even a raspberry pi.?
If Microsoft makes any controversial move, I can see the repositories quickly move away from them. That said, I am not sure that they have the lee-way to do much in terms of changing licensing of the hosted repositories.

- f

On Tue, Jun 5, 2018 at 9:24 AM, Thomas Sharka via Groups.Io <sharkatw@...> wrote:
Corporations are not evil, they're indifferent. That makes them quite dangerous indeed. Microsoft hasn't changed all that much from their adopted philosophy of "embrace, extend and extinguish" since the 90's. If you do a little research, you'll find that most of the corporations have pretty much that same bias. If there's competition, eliminate it. If it's a small start-up, all the more so.

How's that Skype working for you?
?


Sent from Yahoo Mail.


On Monday, June 4, 2018 11:18 PM, "Tom, wb6b" <wb6b@...> wrote:


I certainly would not change from Git. It is a standard that is not tied to GitHub.

I also have an account on BitBucket??BitBucket and GitHub both have free accounts. GitHub bases their paid accounts on the number of repositories, BitBucket on the number of users. Often companies I do consulting for have BitBucket accounts rather GitHub accounts. BitBucket seems to have features that bigger organizations like.?

Microsoft does not seem as evil as they were in the past, but as big companies start buying and consolidating things, and the internet just becomes more of an extension of your cable company and the entertainment industry, the shape of the open internet and open source could change over time. But, that is likely a long way off.

If GitHub becomes an undesirable place to host projects, other companies will will respond with new offerings.

Tom, wb6b
Re: The new uBITX boards are here

 

Jamie,

Check on ebay for old GE and Motorola communication speakers. I found
several of $6. You can either use them as an external speaker or pull
the speaker out and mount it inside your case.

The best communication speaker I have ever had was an old drive-in
movie theater speaker I picked up when one was closing down and selling
everything off. I wish I had bought 20 of them!

tim ab0wr

On Mon, 04 Jun 2018 09:42:35 -0700
"Jamie Anderson" <jamiea@...> wrote:

I also found a 50 ohm version of the Visaton that Mouser carries, so
there are 8, 16, and 50 ohm versions of this water resistant
speaker.? No 32 ohm version, but if 16 or 50 would work I bet this
would be a good sounding speaker for SSB voice on this radio.
Re: RF power chain mods and improvements..

 

Arv,

This is how I've always operated my linear amplifiers. Tune for max in
CW and then mark that level on the oscilloscope. When in SSB never go
above that level with your modulation. It's a pretty conservative way
to operate but it's also the easiest. You don't have to worry about
trying to read a trapezoid display for linearity!

tim ab0wr

On Mon, 4 Jun 2018 15:20:24 -0600
"Arv Evans" <arvid.evans@...> wrote:

As long as the microphone port audio input is below 45
millivolts the spurs seem
to be down at least 50db, but can be pushed even further down by
reducing the audio
level to around 32 millivolts. This seems to be where oscilloscope
peak-to-peak RF level
is about the same as when using CW mode.
Re: Github's future?

 

Corporations are not evil, they're indifferent. That makes them quite dangerous indeed. Microsoft hasn't changed all that much from their adopted philosophy of "embrace, extend and extinguish" since the 90's. If you do a little research, you'll find that most of the corporations have pretty much that same bias. If there's competition, eliminate it. If it's a small start-up, all the more so.

How's that Skype working for you?
?


Sent from Yahoo Mail.


On Monday, June 4, 2018 11:18 PM, "Tom, wb6b" <wb6b@...> wrote:


I certainly would not change from Git. It is a standard that is not tied to GitHub.

I also have an account on BitBucket??BitBucket and GitHub both have free accounts. GitHub bases their paid accounts on the number of repositories, BitBucket on the number of users. Often companies I do consulting for have BitBucket accounts rather GitHub accounts. BitBucket seems to have features that bigger organizations like.?

Microsoft does not seem as evil as they were in the past, but as big companies start buying and consolidating things, and the internet just becomes more of an extension of your cable company and the entertainment industry, the shape of the open internet and open source could change over time. But, that is likely a long way off.

If GitHub becomes an undesirable place to host projects, other companies will will respond with new offerings.

Tom, wb6b
Re: #ubitx-help #ubitx-help

 

You have to have 12V in the RX biDi amps Hakan.

Q10,11,12 and 30,31,32 must have 12v on rx, if not I suspect the relay K1, please check!

Raj

At 04-06-18, you wrote:
To check if the trifilars are shorted I have to unsolder them, so I wait a little with that.
But I measured the 3904:s. All of them had zero volts between base and emitter.
I also measured the voltage between each leg and earth. The highest voltage was around 0.005 volt. Looks strange to me..
And I must tell it was 30 years since I was an active ham, I am 70 now so I'm a little rusty on the electronic skills ;-)
H?kan
Re: Bitx 40 source file

 

Hex files scare me. Nope just unpacked fhe zip file and tried to open the .ino file like I did before.
Re: Bitx 40 source file

Jack Purdum
 

Did you upload a hex file or actually compile the source code? There's a big difference.

Jack, W8TEE

On Monday, June 4, 2018, 11:25:54 PM EDT, kj6etl <pa1zz@...> wrote:


You mean the Arduino application?
its in the Applications folder of MacOS 10.13.5

I can upload basic sketch into the Nano. Further I used this same Application to upload the kd8cec into an other Nano successfuly.

Re: Bitx 40 source file

 

You mean the Arduino application?
its in the Applications folder of MacOS 10.13.5

I can upload basic sketch into the Nano. Further I used this same Application to upload the kd8cec into an other Nano successfuly.
Re: Github's future?

 

I certainly would not change from Git. It is a standard that is not tied to GitHub.

I also have an account on BitBucket??BitBucket and GitHub both have free accounts. GitHub bases their paid accounts on the number of repositories, BitBucket on the number of users. Often companies I do consulting for have BitBucket accounts rather GitHub accounts. BitBucket seems to have features that bigger organizations like.?

Microsoft does not seem as evil as they were in the past, but as big companies start buying and consolidating things, and the internet just becomes more of an extension of your cable company and the entertainment industry, the shape of the open internet and open source could change over time. But, that is likely a long way off.

If GitHub becomes an undesirable place to host projects, other companies will will respond with new offerings.

Tom, wb6b
Re: Bitx 40 source file

Jack Purdum
 

Where is your IDE installed? I see a libraries directory right above the sketch directory, but I don't see all of the other files that should be in the compiler directory. I think your installation of the compiler is incorrect, but I can't be sure since I don't use a Mac. Maybe someone else who has a Mac with the IDE installed can help you.

Jack, W8TEE

On Monday, June 4, 2018, 11:07:44 PM EDT, kj6etl <pa1zz@...> wrote:


Then I created this directory structure:




In the Arduino menu I now see the folder but when I select it it gives me the warning "Could not create the sketch"
Re: Bitx 40 source file

 

Then I created this directory structure:




In the Arduino menu I now see the folder but when I select it it gives me the warning "Could not create the sketch"
Re: Bitx 40 source file

Jack Purdum
 

Not really. Read the popup carefully.? It names the INO file raduino_diag_v3.ino and also names the directory holding that file raduino_diag_v3. As I said before, the directory and the INO file MUST share the same name, just like the popup below says. From your error messages, you didn't do that.


Jack, W8TEE

On Monday, June 4, 2018, 10:53:30 PM EDT, kj6etl <pa1zz@...> wrote:


I have no idea just following the instructions that pop up on the screen....


This is what the directory looks like after I clock OK
Re: Building homebrew ubitx: Need pre-v3 schematic PDF. Also, source for 45M15 (45 MHz IF) filter?

 

And you can make a quartz crystal daisy chain with the other seven? ?8^)??
Re: digital modes - how to connect computer line out

Bo Barry
 

It's called a TRRR connector for the new laptops and probably iPhone. 4 conductors. Mine has the plug and two short audio cables with 3 conductor plugs.
Re: FLdigi

Bo Barry
 

And don't forget to disconnect the orange wire (PTT). The audio cable from the PC doesn't like it. PTT by CAT works great.
Re: Bitx 40 source file

 

I have no idea just following the instructions that pop up on the screen....


This is what the directory looks like after I clock OK
Re: Bitx 40 source file

Jack Purdum
 

I compiled it with IDE 1.8.5 without issue. You do realize you MUST place the INO file in a subdirectory that has the same name, right? That is, if your working directory on C is Arduino, you MUST lay it out as:

C://Arduino/raduino_v1.27.7/raduino_v1.27.7.ino

It appears yours is in the wrong directory. Compare the correct directory name above with what you have below.


Jack, W8TEE

On Monday, June 4, 2018, 10:21:12 PM EDT, kj6etl <pa1zz@...> wrote:


Nope this one is not working either:


Arduino: 1.8.6 Hourly Build 2018/05/28 10:12 (Mac OS X), Board: "Arduino Nano, ATmega328P (Old Bootloader)"
?
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino:61:0: warning: "CAP_SENSITIVITY" redefined
?#define CAP_SENSITIVITY 0 ? ? ? ? // capacitive touch keyer sensitivity 0 (OFF) [accepted range 0-25]
?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:48:0: note: this is the location of the previous definition
?#define CAP_SENSITIVITY 22 ? ? ? ? // capacitive touch keyer sensitivity 0 (OFF) [accepted range 0-25]
?
?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino:70:0: warning: "CLICK_DELAY" redefined
?#define CLICK_DELAY 1500 ? ? ? ? ?// max time (in ms) between function button clicks
?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:57:0: note: this is the location of the previous definition
?#define CLICK_DELAY 750 ? ? ? ? ? // max time (in ms) between function button clicks
?
?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino:338:0: warning: "bfo_freq" redefined
?#define bfo_freq (11998700UL)
?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:271:0: note: this is the location of the previous definition
?#define bfo_freq (11998800UL)
?
?^
raduino_v1.27.7:76:8: error: redefinition of 'struct userparameters'
?struct userparameters {
? ? ? ? ^
raduino_diag_v3:63:8: error: previous definition of 'struct userparameters'
?struct userparameters {
?
? ? ? ? ^
raduino_v1.27.7:105:23: error: redefinition of 'userparameters u'
?struct userparameters u;
? ? ? ? ? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:92:23: note: 'userparameters u' previously declared here
?struct userparameters u;
?
? ? ? ? ? ? ? ? ? ? ? ?^
raduino_v1.27.7:150:10: error: redefinition of 'uint32_t si5351bx_vcoa'
?uint32_t si5351bx_vcoa = (SI5351BX_XTAL*SI5351BX_MSA); ?// 25mhzXtal calibrate
? ? ? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:150:10: note: 'uint32_t si5351bx_vcoa' previously defined here
?uint32_t si5351bx_vcoa = (SI5351BX_XTAL*SI5351BX_MSA); ?// 25mhzXtal calibrate
?
? ? ? ? ? ^
raduino_v1.27.7:151:10: error: redefinition of 'uint8_t si5351bx_rdiv'
?uint8_t ?si5351bx_rdiv = 0; ? ? ? ? ? ? // 0-7, CLK pin sees fout/(2**rdiv)
? ? ? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:151:10: note: 'uint8_t si5351bx_rdiv' previously defined here
?uint8_t ?si5351bx_rdiv = 0; ? ? ? ? ? ? // 0-7, CLK pin sees fout/(2**rdiv)
?
? ? ? ? ? ^
raduino_v1.27.7:152:26: error: redefinition of 'uint8_t si5351bx_drive [3]'
?uint8_t ?si5351bx_drive[3] = {1, 1, 1}; // 0=2ma 1=4ma 2=6ma 3=8ma for CLK 0,1,2
? ? ? ? ? ? ? ? ? ? ? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:152:10: note: 'uint8_t si5351bx_drive [3]' previously defined here
?uint8_t ?si5351bx_drive[3] = {1, 1, 1}; // 0=2ma 1=4ma 2=6ma 3=8ma for CLK 0,1,2
?
? ? ? ? ? ^
raduino_v1.27.7:153:10: error: redefinition of 'uint8_t si5351bx_clken'
?uint8_t ?si5351bx_clken = 0xFF; ? ? ? ? // Private, all CLK output drivers off
? ? ? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:153:10: note: 'uint8_t si5351bx_clken' previously defined here
?uint8_t ?si5351bx_clken = 0xFF; ? ? ? ? // Private, all CLK output drivers off
?
? ? ? ? ? ^
raduino_v1.27.7:173:18: error: redefinition of 'LiquidCrystal lcd'
?LiquidCrystal lcd(8, 9, 10, 11, 12, 13);
? ? ? ? ? ? ? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:170:15: note: 'LiquidCrystal lcd' previously declared here
?LiquidCrystal lcd(8, 9, 10, 11, 12, 13);
?
? ? ? ? ? ? ? ?^
raduino_v1.27.7:187:10: error: redefinition of 'char c [17]'
?char c[17], b[10], printBuff[2][17];
? ? ? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:184:6: note: 'char c [17]' previously declared here
?char c[17], b[10], printBuff[2][17];
?
? ? ? ^
raduino_v1.27.7:187:17: error: redefinition of 'char b [10]'
?char c[17], b[10], printBuff[2][17];
? ? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:184:13: note: 'char b [10]' previously declared here
?char c[17], b[10], printBuff[2][17];
?
? ? ? ? ? ? ?^
raduino_v1.27.7:187:35: error: redefinition of 'char printBuff [2][17]'
?char c[17], b[10], printBuff[2][17];
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:184:20: note: 'char printBuff [2][17]' previously declared here
?char c[17], b[10], printBuff[2][17];
?
? ? ? ? ? ? ? ? ? ? ^
raduino_v1.27.7:223:6: error: redefinition of 'bool PTTsense_installed'
?bool PTTsense_installed; //whether or not the PTT sense line is installed (detected automatically during startup)
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:219:6: note: 'bool PTTsense_installed' previously declared here
?bool PTTsense_installed; //whether or not the PTT sense line is installed (detected automatically during startup)
?
? ? ? ^
raduino_v1.27.7:247:6: error: redefinition of 'bool TXRX_installed'
?bool TXRX_installed = true; // whether or not the TX_RX mod (PTT bypass transistor) is installed (set automatically at startup)
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:242:6: note: 'bool TXRX_installed' previously defined here
?bool TXRX_installed = true; // whether or not the TX_RX mod (PTT bypass transistor) is installed (set automatically at startup)
?
? ? ? ^
raduino_v1.27.7:280:15: error: redefinition of 'long unsigned int vfoA'
?unsigned long vfoA; ? ? ? ? ? ? ? // the frequency (Hz) of VFO A
? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:256:15: note: 'long unsigned int vfoA' previously declared here
?unsigned long vfoA; ? ? ? ? ? ? ? // the frequency (Hz) of VFO A
?
? ? ? ? ? ? ? ?^
raduino_v1.27.7:281:15: error: redefinition of 'long unsigned int vfoB'
?unsigned long vfoB; ? ? ? ? ? ? ? // the frequency (Hz) of VFO B
? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:257:15: note: 'long unsigned int vfoB' previously declared here
?unsigned long vfoB; ? ? ? ? ? ? ? // the frequency (Hz) of VFO B
?
? ? ? ? ? ? ? ?^
raduino_v1.27.7:282:6: error: redefinition of 'byte mode'
?byte mode = LSB; ? ? ? ? ? ? ? ? ?// mode of the currently active VFO
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:258:6: note: 'byte mode' previously defined here
?byte mode = LSB; ? ? ? ? ? ? ? ? ?// mode of the currently active VFO
?
? ? ? ^
raduino_v1.27.7:283:6: error: redefinition of 'bool inTx'
?bool inTx = false; ? ? ? ? ? ? ? ?// whether or not we are in transmit mode
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:259:6: note: 'bool inTx' previously defined here
?bool inTx = false; ? ? ? ? ? ? ? ?// whether or not we are in transmit mode
?
? ? ? ^
raduino_v1.27.7:286:15: error: redefinition of 'volatile bool TXstart'
?volatile bool TXstart = false; ? ?// this flag will be set by the ISR as soon as the PTT is keyed
? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:260:15: note: 'volatile bool TXstart' previously defined here
?volatile bool TXstart = false; ? ?// this flag will be set by the ISR as soon as the PTT is keyed
?
? ? ? ? ? ? ? ?^
raduino_v1.27.7:301:6: error: redefinition of 'bool CapTouch_installed'
?bool CapTouch_installed = true; ?// whether or not the capacitive touch modification is installed (detected automatically during startup)
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:266:6: note: 'bool CapTouch_installed' previously defined here
?bool CapTouch_installed = true; ?// whether or not the capacitive touch modification is installed (detected automatically during startup)
?
? ? ? ^
raduino_v1.27.7:302:6: error: redefinition of 'byte base_sens_KEY'
?byte base_sens_KEY; ? ? ? ? ? ? ?// base delay (in us) when DIT pad is NOT touched (measured automatically by touch sensor calibration routine)
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:267:6: note: 'byte base_sens_KEY' previously declared here
?byte base_sens_KEY; ? ? ? ? ? ? ?// base delay (in us) when DIT pad is NOT touched (measured automatically by touch sensor calibration routine)
?
? ? ? ^
raduino_v1.27.7:303:6: error: redefinition of 'byte base_sens_DAH'
?byte base_sens_DAH; ? ? ? ? ? ? ?// base delay (in us) when DAH pad is NOT touched (measured automatically by touch sensor calibration routine)
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:268:6: note: 'byte base_sens_DAH' previously declared here
?byte base_sens_DAH; ? ? ? ? ? ? ?// base delay (in us) when DAH pad is NOT touched (measured automatically by touch sensor calibration routine)
?
? ? ? ^
raduino_v1.27.7:304:6: error: redefinition of 'bool capaKEY'
?bool capaKEY = false; ? ? ? ? ? ?// true when DIT pad is touched
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:269:6: note: 'bool capaKEY' previously declared here
?bool capaKEY, capaDAH;
?
? ? ? ^
raduino_v1.27.7:305:6: error: redefinition of 'bool capaDAH'
?bool capaDAH = false; ? ? ? ? ? ?// true when DAH pad is touched
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:269:15: note: 'bool capaDAH' previously declared here
?bool capaKEY, capaDAH;
?
? ? ? ? ? ? ? ?^
raduino_v1.27.7:340:15: error: redefinition of 'long unsigned int baseTune'
?unsigned long baseTune = 7100000UL; // frequency (Hz) when tuning pot is at minimum position
? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:272:15: note: 'long unsigned int baseTune' previously defined here
?unsigned long baseTune = 7100000UL; // frequency (Hz) when tuning pot is at minimum position
?
? ? ? ? ? ? ? ?^
raduino_v1.27.7:341:5: error: redefinition of 'int old_knob'
?int old_knob = 0;
? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:273:5: note: 'int old_knob' previously defined here
?int old_knob = 0;
?
? ? ?^
raduino_v1.27.7:343:15: error: redefinition of 'long unsigned int frequency'
?unsigned long frequency; ? ?// the 'dial' frequency as shown on the display
? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:274:15: note: 'long unsigned int frequency' previously declared here
?unsigned long frequency; ? ?// the 'dial' frequency as shown on the display
?
? ? ? ? ? ? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void si5351bx_init()':
raduino_v1.27.7:390:6: error: redefinition of 'void si5351bx_init()'
?void si5351bx_init() { ? ? ? ? ? ? ? ? ?// Call once at power-up, start PLLA
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:306:6: note: 'void si5351bx_init()' previously defined here
?void si5351bx_init() { ? ? ? ? ? ? ? ? ?// Call once at power-up, start PLLA
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void si5351bx_setfreq(uint8_t, uint32_t)':
raduino_v1.27.7:404:6: error: redefinition of 'void si5351bx_setfreq(uint8_t, uint32_t)'
?void si5351bx_setfreq(uint8_t clknum, uint32_t fout) { ?// Set a CLK to fout Hz
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:320:6: note: 'void si5351bx_setfreq(uint8_t, uint32_t)' previously defined here
?void si5351bx_setfreq(uint8_t clknum, uint32_t fout) { ?// Set a CLK to fout Hz
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void i2cWrite(uint8_t, uint8_t)':
raduino_v1.27.7:429:6: error: redefinition of 'void i2cWrite(uint8_t, uint8_t)'
?void i2cWrite(uint8_t reg, uint8_t val) { ? // write reg via i2c
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:345:6: note: 'void i2cWrite(uint8_t, uint8_t)' previously defined here
?void i2cWrite(uint8_t reg, uint8_t val) { ? // write reg via i2c
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void i2cWriten(uint8_t, uint8_t*, uint8_t)':
raduino_v1.27.7:436:6: error: redefinition of 'void i2cWriten(uint8_t, uint8_t*, uint8_t)'
?void i2cWriten(uint8_t reg, uint8_t *vals, uint8_t vcnt) { ?// write array
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:352:6: note: 'void i2cWriten(uint8_t, uint8_t*, uint8_t)' previously defined here
?void i2cWriten(uint8_t reg, uint8_t *vals, uint8_t vcnt) { ?// write array
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void updateDisplay()':
raduino_v1.27.7:469:6: error: redefinition of 'void updateDisplay()'
?void updateDisplay() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:385:6: note: 'void updateDisplay()' previously defined here
?void updateDisplay() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void bleep(int, int, byte)':
raduino_v1.27.7:525:6: error: redefinition of 'void bleep(int, int, byte)'
?void bleep(int pitch, int duration, byte repeat) {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:433:6: note: 'void bleep(int, int, byte)' previously defined here
?void bleep(int pitch, int duration, byte repeat) {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void setFrequency()':
raduino_v1.27.7:646:6: error: redefinition of 'void setFrequency()'
?void setFrequency() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:442:6: note: 'void setFrequency()' previously defined here
?void setFrequency() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void SetSideBand(byte)':
raduino_v1.27.7:1303:6: error: redefinition of 'void SetSideBand(byte)'
?void SetSideBand(byte drivelevel) {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:473:6: note: 'void SetSideBand(byte)' previously defined here
?void SetSideBand(byte drivelevel) {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void ISRptt()':
raduino_v1.27.7:1823:6: error: redefinition of 'void ISRptt()'
?void ISRptt(void) {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:497:6: note: 'void ISRptt()' previously defined here
?void ISRptt(void) {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'int knob_position()':
raduino_v1.27.7:1828:5: error: redefinition of 'int knob_position()'
?int knob_position() {
? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:502:5: note: 'int knob_position()' previously defined here
?int knob_position() {
?
? ? ?^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void set_drive_level(byte)':
raduino_v1.27.7:1854:6: error: redefinition of 'void set_drive_level(byte)'
?void set_drive_level(byte level) {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:529:6: note: 'void set_drive_level(byte)' previously defined here
?void set_drive_level(byte level) {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void shiftBase()':
raduino_v1.27.7:1901:6: error: redefinition of 'void shiftBase()'
?void shiftBase() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:543:6: note: 'void shiftBase()' previously defined here
?void shiftBase() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void doTuning()':
raduino_v1.27.7:1919:6: error: redefinition of 'void doTuning()'
?void doTuning() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:561:6: note: 'void doTuning()' previously defined here
?void doTuning() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void factory_settings()':
raduino_v1.27.7:2070:6: error: redefinition of 'void factory_settings()'
?void factory_settings() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:699:6: note: 'void factory_settings()' previously defined here
?void factory_settings() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void save_frequency()':
raduino_v1.27.7:2081:6: error: redefinition of 'void save_frequency()'
?void save_frequency() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:710:6: note: 'void save_frequency()' previously defined here
?void save_frequency() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void touch_key()':
raduino_v1.27.7:2142:6: error: redefinition of 'void touch_key()'
?void touch_key() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:813:6: note: 'void touch_key()' previously defined here
?void touch_key() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void calibrate_touch_pads()':
raduino_v1.27.7:2204:6: error: redefinition of 'void calibrate_touch_pads()'
?void calibrate_touch_pads() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:732:6: note: 'void calibrate_touch_pads()' previously defined here
?void calibrate_touch_pads() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void setup()':
raduino_v1.27.7:2283:6: error: redefinition of 'void setup()'
?void setup() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:865:6: note: 'void setup()' previously defined here
?void setup() {
?
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_v1.27.7.ino: In function 'void loop()':
raduino_v1.27.7:2383:6: error: redefinition of 'void loop()'
?void loop() {
? ? ? ^
/Users/rogierwillems/Desktop/raduino_v1.27.7/raduino_diag_v3/raduino_diag_v3.ino:989:6: note: 'void loop()' previously defined here
?void loop() {
?
? ? ? ^
exit status 1
redefinition of 'struct userparameters'
?
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
?
Re: Bitx 40 source file

M Garza
 

For the factory firmware, you need to load in the Etherkit si5351 library into the IDE to be able to compile it.

Hope this helps.

Marco - KG5PRT

On Mon, Jun 4, 2018 at 9:05 PM, kj6etl <pa1zz@...> wrote:
Thanks, as I mentioned the original Farhan wan't load because when I try to verify it it tells me its not complete.
Will try Allards version


Re: FLdigi

Bo Barry
 

I got it going by installing and running flrig.? Hamlib wouldn't work.

?The Raspberry pi version didn't have a provision for flrig, so I picked rigcat option and it works fine on the pi. Doing the PC tomorrow.

73, Bo W4GHV since '54

On 4 June 2018 at 22:01, Dennis <dennis@...> wrote:
Bump,

Sure would appreciate some help getting fldigi to transmit. In that I have no trouble getting FT8 to transmit, I suspect it is a setting within fldigi that I have wrong. I'm using the setup outlined in the wiki?/g/BITX20/wiki/Digital-Setup

Thanks,
73, Dennis
W7DRW


Re: RF power chain mods and improvements..

 

Its the rare air of VHF and up where I spend more time guess.

Good on that.

Mine however unless I limit the power hard, not good.??
I'm going the band pass route.? For the bands under 20mhz not a problem I can find.
To many projects...

Allison
65841 - 65860 of 116852