开云体育

Last month I spent 3 weeks at our cabin in OK.? I only needed to drive about 1/4 mile up the road to be within the borders of the Ouachita National Forest so I decided it was time to activate a

Interesting.? I guess that saves redoing the PCB trace layout... 73, Justin B. KI5GKD

Arnie (and others who don't understand why), It was designed that way so the back of the display would not short out against any of the metal on the NANO. It used to be on the front, but people had

While rummaging around in my storage I found a Ver3 UBITX Kit in the original box. I remember testing this board previously and the Raduino with my working UBITX and found it operating. The only thing

THanks Justin. I usually have seen Nano's with the pins mounted from the bottom of the board. The nano that came with the ubitx v6 had the pins mounted on the opposite side of the board, which makes

Arnie, Glad you got it sorted!? So, you put in a different Nano that had the headers soldered onto the "correct" side?? Been there, done that!? Enjoy your new display... 73, Justin B. KI5GKD

Just finished watching this. Great presentation of practical radio knowledge for experimenters and builders. I really liked the practical test and measurement techniques that were done with minimal

Hello: I red a previous message where an individual used a PC board attached to the back side of a Nection display. It suppose to have got rid of the display noise that was making it back in to the

Bem-vindo Sasi Bhushan. Desejo a você todo o sucesso e tenho certeza que sua habilidade e conhecimento ir?o agregar muito ao grupo trazendo crescimento e satisfa??o a todos os integrantes.

Well deserved rest! Thanks, Gordon Gibby KX4Z

Hi, I have helped newbies here a few times but usually by the time I read a request for help I find that Arv has already replied and there is nothing to add. I also noticed that Arv has even more

Farhan's Amazing Knack Story: From a Boyhood SW Receiver to the Design of the sBITX SDR | | | | | | | | | | | Farhan's Amazing Knack Story: From a Boyhood SW Receiver to the Design ... Radio

Thanks for your input Justin. In my case, the problem was definitely cased by the wrong orientation of the Nano pins, thereby causing a short to ground. Now that I have a new Nano onto which I have

An excellent talk - never realized that two hours went by so fast . Thanks Farhan!

Arv, Muito grato pelas contribui??es ao radioamadorismo!!! -- 73's PY2PVB Rubens Kamimura Técnico em Eletr?nica e Eletrotécnica - Aposentado CFT/CRT-SP: 80254934820 Cel. +55 (18) 9-9819-2225

Good point about the bypass cap(s). When I first built by uBitX I was getting RF in the audio on 80m, only, and a single cap across the mic line to ground fixed that. Forgot that was still in there.

You may want to add 0.1 MFD caps from each side of mic connector to ground. 73 Dave WD8AJQ Sent from my iPhone 5

Thanks Farhan for adding me as moderator. I also take this opportunity to thank the group and hope to live up to the expectations setup by others especially Arv. 73 Sasi - VU2XZ

Excellent talk. I am super excited about building and operating sbitx transciever. “Hurry Christmas please don’t be late” (popular children’s songs from the 50s)

Hi Curt.? Yes, this happens to me on 40 m and 17 m, but not on 20 m.? It only happens on digital modes, not on voice SSB.? It happens when I use SignaLink, but not when I use Easy Digi as an