开云体育

I like this one due to price, options and

Nothing wrong with welding parts to a PC board, I understand what is meant perfectly well. This is an international forum. Not everyone follows your notions of typical American English usage. Fine

Arv, You've done a fair bit of coding yourself, I suspect you already know most of the stuff I try to explain here. But to keep anyone in the forum from getting confused, allow me to respond to some

Evan Thank you for that info. I had looked at both connectors and apparently mistakenly assumed that 3.0 was not backward compatible. Arv _._

The short answer is yes, though it will not transfer at the higher data rate.? The extra data pins are not connected to the 2.0 cable. 73 Evan AC9TU

Are you using *weld* to mean the same as *solder*?

Nick, 2 questions: 1 - The last reading is for 80 meters? 2 - What frequency did you use to test 40meters?? There is an anomaly at a setting of 7.000 HMZ on the frequency that could switch in the

Jerry I'm still confused. Can I plug a USB 2.0 micro cable into a USB 3.0 connector? On-line information on the RP2040 chip is somewhat limited, but implies that it is compatible with code written

HI, I install the Arduino on my Linux machines (Raspberry Pis) directly from the download provided on the Arduino web site. That download and installer is up to date. I have a RPi 4 and I really

Hello, I n short I have not welded my capacitors and resistances. I did not know that there were differents models of cms, and so those received were in 0805. Impossible to weld them because the

Hi Again... Just an update on the 'low power' situation... While I wait for the dummy load/power meter kit from QRP Guys, and the buts for my RF probe, I managed to borrow an MFJ Power/SWR meter

Arv, First a quick paragraph for those who don't know an RPi-Zero from an RPi-Pico: Using a Raspberry Pi running linux as a host computer has been done, could work well. In post #86951, WA4THR

If replacing the Arduino with a Raspberry Pi then any of the RSPi versions should be more than fast enough. If using a RsPi as the attached PC for interface with an Arduino the fastest and most

I use a 10x stereo inspection microscope for my 'small' soldering jobs.? I've found it very useful! and, quite fascinating to watch as the heat from the soldering iron flows to the pad & component

Jerry, We have both , ILI9341 and Si5351 done. What remains is just the spaghetti code to tie up the things. I will do a release of a trivial implementation soon. Venu, VU2BVA build an adapter for the

Farhan, Agreed, the RPi-pico looks like a wonderful long term choice, for many reasons. But most vendors are out of stock on the RPi-pico, and I'm not seeing anybody selling more than one or two at a

I have two on order. They're also in short supply . -- 73 Bob? KD8CGH

Stephen Decide your operating style, hand mike or headset. I use a pc headset with an adapter with my main rig. For ubitx I grabbed a surplus HT speaker mike, and found it works wonderful with the

Hi there People. Well, I've ordered my BITX V6.? now I need help choosing a better microphone. I want to get a better quality one, either noise cancelling or Speech processing. Also, what is the

With *stock firmware* on the uBITX v6, is there any easy way to configure rig control over the USB port? I see numerous posts saying that flrig should work configured to expect the radio to emulate a