开云体育

Jack, I am at home and downloaded the newest file in the groups.io file section, extracted it, and compiled it.? I did not get any errors.? Here is the tools dropdown in the Arduino

Should R51 be connected to TX or 12V? On the schematic it's not connected to anything. In the PTO the text talks about a 7809 but the schematic shows 7805. On a happy note, the PTO 3D print worked

Thanks Ashhar. Perhaps I should have thought of volunteering to distribute for Australian purchasers earlier but hopefully the postage costs for HF Sigs weren't too high. . 73 Bill. VK7MX

You are correct. I should have read the email better. I will blame it on grandkids distraction. I have not run into the issue you describe. ?I would verify that you have the correct card selected

Thanks for the quick answer Evan, Now I am confused (more). I thought that the Nextion editor construct was a separate issue from the uBITX V6 software compile. I am missing something(s) I guess.

You may need to use the LTS version of the Nextion editor. Look for it on the Nextion web page. I am away from my qth right now. ?If you can not find it I will post the link when I get

Need help troubleshooting. #sketch-too-big For those who have successfully installed the latest drop of N8ME_2_VU3GAO_Mods, what Arduino ISP version are you using? -What are the parameters in the ISP

I have some updates available for testing here: https://github.com/k3ng/sbitx-k3ng/tree/2022.09.06.0115 <https://github.com/k3ng/sbitx-k3ng/tree/2022.09.06.0115> This includes the following

Dave Thanks for the kind words. I not that young and I forgot more than I know. I was licensed in 1979 ask KA3DFK I took off about 30 years an got back in to it during the Pandemic. That’s how I got

Actually there’s already literature on it. I’m going to dig again ex: Re: #uBITX Firmware KD8CEC - IF-Shift etc. (groups.io) ( /g/BITX20/message/44278 ) [email protected] | Need

This is the one I have been using for a while. https://www.amazon.com/dp/B08R6337QY I also need to swap my IRFZ24 FETs but that was due to a high SWR scenario, the buck converter is still working

Hello, When analyzing the programs KD8CEC or Ubitx V4,5,6 I have a little trouble to understand how the different values of First IF, Second USB, Second LSB and int USB are calculated. In the KD8CEC

Scott, Do you have a part number for your buck converter?? I think it's amazing that Ashar is sending replacements out.? However I am hoping to do a POTA activation next Thursday and I'd like to

Hi, send me a private message?and I will send you the .apk file. The link only contains the source code. Ramón

Begin by looking at the 5v regulator. It is the 388 or its replacement switching regulator just next to the 12 volt input to the unit. Pete WK8S

Scttmtclf, What you describe is exactly my experience. ?The root cause is the LM338 failing and you probably lost one or both of the PA transistors as well. ?The overall problem is the heat sink

Scttmtclf, I would verify that the LM338T provides the 5volts to the Raspberry Pi (RPi).? You could verify that the RPi is still working by removing it from the radio, connecting an HDMI display, a

Use IDM Internet Download Manager or IDM Integration Module in your browser. There is probably another download manager that can resume the interrupted download. -- Gyula HA3HZ

Yes it is getting power. I swapped power supplies, and it still did not turn on. I also used its power supply on another radio, and it worked correctly

Hello everybody. I am trying to download the image for the Sbitx sd. i couldn't download it, despite trying with win10m win 7 and win xp. I can't finish the download. do you have any ideas? I should