开云体育

I agree about the defaulting the EEPROM idea, Jerry.? That's why I put that into the code yesterday.? I made a short demo video of the changes I've made to the software for my ham club and put it on

HI, Can anyone tell me where i can buy the on/off/volume control for the V6 bitx mines broken off. dave

I don't think the volume level would be high enough, I assume it was originally intended to be an add on to a rig that took it's input from the phone/speaker output then feeding a separate amp, hence

Hi Gary, my ubitx run with v5.1 firmware (that i can see on the screen at startup) 73'

Hi Jerry, thx you, it's a good start to check. my ubitx run with v5.1 firmware (that i can see on the screen at startup) my?oscilloscope can up to 50mhz, yesterday, i have cheked the rf connector, i

Jerry, what do you think about this case as far as portable use?? I was a little concerned with the vents, I figure they'd make it a lot easier for foreign matter to get in there. Rob KC4UPR

i fixed the problem by turning over the display.? works dave k7da

Hi my name is Tony ei3it, A friend of mine left me in a uBitx he built which has a problem the raduino nano witch seams dead no reaction from it the display lights up but nothing happens, so put my

I haven't look at Farhan's code in detail, but the Adafruit library has a setRotation() call that allows you to rotate the orientation of the display. I don't know if Farhan is using it, however.

Just what I had in mind, maybe a VK/ZL version was sent to US ? Raj

Some hams I knew in Californicated were using 120 V AC plugs on their radios. However, that is a piss poor Idea, considering what that voltage can quickly do to an item made for 12VDC, should someone

If I were putting in another power socket, I would use Anderson Power Poles. They give a positive connection, and are unlikely to be cross polarized. I use them on everything! 73 de W5ALX Alex

For anyone interested in bare boards for BITX40 and 20, amateurradioits.in still has some different ones available. The one I purchased uses certain social SBL something mixers. One they sell uses ADE

Wouldn’t it work to insert it between audio connector for volume control high side and the control?

QTH is in north or south hemisphere? _._ wrote:

You will need to provide the details on the uBitx: version, any extra addons, etc. Best choice is to just remove and reinstall the display. 73 Evan AC9TU

thinking about this the picture was rightside up when i first connected to as i had it in the panel and was working. what might have happened? dave

is there a way to turn the picture over on the display. apparently? i mounted the display upside down. you would have thought that the? labels would be right side up when mounted but i guess not

Hi, The onboard LM386 is still used but I have taken the output to the input of the sotabeams filter, the sotabeams filter has two outputs so used the circuit provided by sotabeams (it is on their

Here's a corrected version of that chart showing how TXA,TXB,TXC get mapped to specific bands. Corrections are:? 30m should read 10m for 30mhz,? ?and? "else c=0 for 40m, else 80m". Note that the