开云体育

You guessed it, that's the one... Sorry, I forgot to quote the original text, nice working hunting down the old post... Ha!? Nope, no mountain tops in a hailstorm.? More likely, car cam

The 2020 Southeastern VHF Society Conference will be held in Gainesville, Georgia on April 24-25, 2020. Gainesville, GA is approximately 60 miles north of Atlanta in EM84ch. It is about 1.5 miles from

Andy The electret microphone that comes with uBITX puts our approximately 45 millivolts. Microphone input includes a pull-up resistor for powering the mike, so you may want a pull-down resistor that

When trying to compile the new nextion hmi posted Dec 1st the file will not compile on the nextion 7 basic mode it spits out a memory error and stops . This is on the new 0.59 version of the nextion

See if g0ayd has his email at qrz.com

Anybody have a audio level to use at the mic input for a two tone test tone for SSB power o/p and? alignment checks??

hi my friend i would like to aquire the pcb but the email address is incomplete down to LO i suspect got the up to@ then npthing bit frustrating

Solid steps forward! I already had the non-defaulting values for the cals, but the submenuing idea makes a lot of sense. I'll get that added to my master soon :) Reed

Well, last week, I ordered a nice case to house one of my BITX40's. It arrived yesterday or today, really fast service from India. Well packed and as per shown on the website. Amateuradiokits.in.

What does the setup do as far as keyers are concerned? I made up two TRS jacks one ties in via 10 kohm input to keyer and 2nd the 2.2 kohm input line. These appear to be two iambic inputs but the

Thanks for the reminder Curt, thought I had checked that but apparently not, plugging in the straight key did the trick and I found the wiring diagram for the iambic key. uBitx is working good now in

The ones I purchased came with nuts and washers. If they don't look for another vendor. Always a good idea to have spares on hand. Wayne WA2YNE

And look they come with the nuts for mounting?? 73 Mick VA3EPM

Hi Morris, When it says "tune" it actually means tuning the BFO, not the tuner. You'll want to push the tuner knob in and then hold it in for a LONG time. This should pop up the setup menu, at which

Hi Gary, This isn't part of my pdq_gfx_update branch, but you can see the implementation I plan to use here: https://github.com/reedbn/ubitxv6/blob/one_stop_settings/nano_gui.cpp#L14 The memset is

You're wrong and it's still not safe. When globals are initialized at their global definition, they are only initialized once at load time. So, when you call the frequency format routine the first

I am trying to use the BFO tuning aid. What exactly does the part of the website mean that says to tune until the noise is centered between the two red lines? I have noise all the way across with a

Thanks Jack and Reed. When I created the global buffers in my test code: char b[30] = {'\0'}; char c[30] = {'\0'}; The function is only called with initialized buffers from what I saw in a quick look

I agree with Jack. Memset is an important part of that implementation. b and c are global reusable char array buffers in the code. Reed

Hi Reed, Okay, I'm using it now and all seems to be good and stable, I will continue to use it today and report back later if I run into any problems. Joel N6ALT