开云体育

Over the years I have seen radio and computer chassis/board-to-board wiring as singles, twisted, or braided.?On all that I have built I generally twist the wires from board to board or to chassis

He's got some unique, properly designed, well documented stuff there. Jerry

I received an email from Makis Katsouris, SV1AFN in Greece. He offers for sale a few nice items relevant to the BITX series of Transceivers. His latest addition is a GPS disiplined oscillator 1Khz to

I need one as well if there is anyone else out there with an extra one. -- N5KBP

Hi Chuck, I have a set of each I'll sell you, please contact me at my email address. Joel N6ALT

Kees says he is out of stock. If you have an extra, let me know & I will contact you to work out the details.? Thanks, -- 73's DE Chuck K5IJD

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* OutboardRelaysDesignDocumentTry3.pdf *Uploaded

Interesting.? Thanks for the info ke4d.

http://www.hamskey.com/2018/08/ubitx-firmware-cec-version-1097beta.html#more When I2C type signal-meter sensor is used, end of filename ends with _S.

I had a similar situation. Many attemps and finally it just decided to load.

Thanks Joe.

Patrick, I believe that the message was 54389 and you had lost audio. Now that you have the 'scope (Congratulations!) you can take a look at the I/O from T7/C222-1 and see if there is anything coming

There were a few misunderstandings and misreadings in the reply to me that was well intentioned. I have send a direct post to AE. CMOS HCT4051 for example can withstand a full range of 10V offset

What is the difference between the two files?? Is one for the enhanced, and the other for standard Nextion? Bill K0WHW

Schematic as per Kevin's request. Too late for him as he resolved the issue by himself but may be useful for others. Picture of 4 pin molex connector added to the V3 Raduino for pickup of T/R (D7),

Timothy You are talking about a 10+ year old design in that original BITX20 board from Far Circuits. We have come a long way since then. That old circuit will work, but there are better BITX

Dear Mr Allison many thanks for the detailed info. The skert or shape of 12 MHz filter is too great as you mentioned. Thus mooving BFO higher will give you not only carrier? but some ather side band

Glen, Allison, Warren, Farhan, etc. After much tinkering with 15M band filters, it seems that the Elliptical or Cauer filter is easiest of the simpler filters to get an adequate dip at 23.55

I'm slow on my hobbies sometimes... But hey now I have an oscilliscope (Tektronix 2205) looking beautiful on my bench and I'm very happy about that! I tried what you suggested, and putting in a jump

Shorter paths: