开云体育

Hi All I have just purchased one of the Sota beams Digital filters for CW audio, but am unsure of where to connect it in the audio chain. Has anyone implemented one of these in their ubitx and can

Oh yes I remember now I added one here because I wasn’t happy how hot that regulator was getting. I think I measured the temp at over 110 degrees F. Nice set up you have. Skip Davis, NC9O

Also, you can add SMD 1205 version of 4.7K on the Raduino board.

@Vince, Yes, with KD8CEC firmware in the Raduino, you have full CAT control over the uBitx (it 'thinks' it is an FT-817). @ Dave, I mean, the USB cable from your PC to the uBitx (and therefore the

As they said in JAWS, "I think we need a bigger boat". Gary, KJ5VW, has volunteered to pull together a spreadsheet with all the requests to date and those that were sent to me directly. That way we'll

The Raduino does not come with a heat sink on the LM7805, and generally does not need one. Some users do feel it gets hot enough for concern, and add either a heat sink or a dropping resistor. Unlike

Mike I want to order the ubitx assembled version . what was the site again ?

The standard firmware only provides basic LSB functionality. Improved Raduino firmware for BitX40 supporting LSB, USB, CWL, CWU, and other useful functionality is available at

SD: ?" I noticed you removed the heat sink on the regulator on the Raduino " ... I didn't know it needed a heatsink, it didn't come with one, meaning I haven't removed it. ?I haven't notice them on

DuWayne, That is EXACTLY the type of thing I was talking about. Good for you ! 73 Kees K5BCQ

Wallowa county is 75 miles across, well protected on all sides by the Blues to the west, the Wallows to the south,?the Grande Ronde Canyon to the north, and Hell's Canyon on the east. Far from any

"A DHL truck in northern Michigan is so rare there will probably be a mention about it on tonight's news." Sounds like here in northeastern NC -? The "official" population of my town is 117 people.?

That's what I did. A ham since '54 I'm tired of drilling! ? Got my ubitx going immediately with it, still awaiting the slow boat from China with my case. When it comes, who will cut its panel

I purchased mine and it was well worth it. Bill WA8VIH wnpauls@...> wrote:

I agree with Arvo.? Do not download, it just encourages the download site to steal more Paul

Alternately, check out this thread: ? ??h/g/BITX20/message/45775 ( /g/BITX20/message/46235 )? Zero new hardware required. I have not tried it. I'm curious if

Indeed and 100% agree I have a life time commitment to paying for everything I read if its not offered free. I have tried to teach my kids this for movies, software, books etc. I think I managed to

Do not try this at a regular bookstore.? If you do, you will appreciate the ethical and moral humbrage taken when you steal something, even with the intent of paying for it if it suits your fancy.

I have been working on converting to a 2.4" SPI TFT display for a while now, and have most of it finished. You can use 4 of the existing pins that go to the display, but will have to do some level

Choice of increments Band Very stable for various projects of mine For those interested I attached my sketch