开云体育

I'm not going to regurgitate the whole of this thread here, Jerry, but will offer this: I reply online, and refrain from the tedium of cut-and-paste for context. I haven't tried it here, but on

My turn to nitpick at myself :) Original Bitx has a pot, not the rotary encoder. This is what I built. Anyway, have fun with your presentation :) Cheers, Goran

Re-done! :) feel free to use this one 73 Goran VE6GPO

Yes, you are both right, that's what happens when you copy/paste :( ... Dale, if you are going to re-do this for your presentation, note this. Thanks to Keith and Lawrence. 73, Goran VE6GPO

Vince is right on this one. If it's not worth 3 seconds of your time to include a few bytes of context when needed,? it's certainly not worth 3 minutes of my time to ferret it out. Nor that of the

check the condition of the Fun switch. Check the switch is actually "normally open" re check for resistance in the open state. Or replace the switch. Re-seat the LCD Check where the connection is

Right on, mon! 73 ...

... and being 50 ohms they match the amps'? z i/o. No toroids there! :) 73 ... Thanks for the link, Jerry.

FB. Ancel. You got the real things right. Good projects page, john AD5YE

Thanks for the Ubitx link, I'll certainly give it a shot and publish the build on my hackaday blog. I've got all the RF instrumentation to tweak it into submission. Maybe even do a? higher wattage PA

A quick 'one-liner' back-and-forth will most likely show within a screen of some previous. I consider it more efficient than 10 MB/GB of previous history - and more effective too, with the time taken

No, Dexter got it right this time. He let me know that I forgot to include some current text, not previous. Jerry

That's funny, Dex! Jerry doesn't include previous text in his post and you're lost. Yet you do it all the time to us. Vince. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/

For anyone else that is seeing this problem, I tried isolating power and ground connections to the Raduino and shortening the leads from the main board. I finally decided to try another LCD display.

Thanks for the heads-up, Dexter. Was a bit too fast hitting send on that one. This uBitx webpage: ??http://www.phonestack.com/farhan/ubitx/ubitx.html (

Sorry, Jerry, but I'm just lurking here on Groups.io. "This webpage"? Link please?

Put the spaces[] array definition outside of any function, near the top of the file with the other data definitions, somewhere around line 230. Jack, W8TEE To: [email protected] Sent: Wednesday,

I figured that if there were 10000 steps over 5v, and I had a 20mv drop at the wiper, that would equate to 40 steps, so I figured 50 was a good starting point

I'm looking at the uBitx schematic at the bottom of this webpage. If there's something more recent, I haven't heard about it. Jerry

Hi Allard It's at 9950 right now, hopefully I'll get a chance to play around some more later today. I have insalled the fine tune button, and it is a huge help!