开云体育

Finally here's a full list of what I can order for you from Rapid Electronics http://www.rapidelectronics.co.uk. Prices are the Rapid prices, i.e. no profit for G0UPL :-( Postage is the price of a

--- In BITX20@..., "Mark Jones" <Mark@H...> wrote: Hi, just joined the group. Hope I will have some time to build this great RIG soon. > Hmm, good question. An American asked me recently

On Mon, 21 Jun 2004, david.g3ryp wrote: > I've taken the measurements you suggested and indeed it was the driver whose output was low - only about 1 volt peak. I was using BC549s throughout and

Many thanks for the advice Farhan. I've taken the measurements you suggested and indeed it was the driver whose output was low - only about 1 volt peak. I was using BC549s throughout and although

i calculated 3uH on each winding. - farhan

the 2N2218 is a fatter type of 2N2222. you can use the 2N3866 instead. they are expensive in india. but they might be easier to find elsewhere. - farhan

wrote: with the lpf in circuit. I've checked the lpf cut-off and I would expect some attenuation but not that much. I tried an irf530 which promptly overheated and destroyed itself as I increased

Thanks Hans, and many thanks for the offer of help, much appreciated! 73, Jon H.

Hmm, good question. An American asked me recently what a "jubilee clip" was - that was a struggle. A tap washer is a thin shim of rubber/nylon/fibre that fits inside a water tap (faucet?) - like in

Please could somebody explain to a non-native speaker what "tap washers" are and where to source them? I guess this must be some sort of "plastic toroid" (ab)used as a coil former. But what is

Now the heat's really on at Hans Compoments Inc, then ;-) I used the tap washers for the inductors. Mine are a black rubbery type of material, I didn't find white nylon ones like Farhan's photos.

I wonder how much output everyone's getting from the IRF510? I can get 2.5 watts rf maximum but this drops to well under a watt with the lpf in circuit. I've checked the lpf cut-off and I would

---------- Forwarded message ---------- Date: Sat, 19 Jun 2004 22:08:39 -0700 From: Pete Juliano <jessystems@...> To: Ashhar Farhan <farhan@...> Subject: Re: Fw: First QSO with

Hi All I've completed the VFO today, some pictures on the reflector. Just need to wait for Hans Components Inc before we go any further. VFO swinging from 4.25MHz to 4.4MHz - very adjustable with

Jon, I'll send you an email tomorrow with final details. 72/3 de Hans G0UPL

Please, do not send me any money yet! Now I have 6 orders, which takes us to the 100+ pricing for the BC547B so everything will become slightly cheaper. Thanks for your emails, I will reply

i am in delhi and i iaccidentally discovered the outlet of a major manufacturer of those tv balun cores. i have bought 500 of them for Rs.200 (about 4 dollars). sending it across to england and usa

dear pete, very good on your efforts. which crystals are you using? the Cb crysals available for 9MHz are quite cheap. i am using a PC-based AGC system with some kind of noise blanker and even

Sign me up too Hans, where do i send the cash! Cheers, Jon H.

i have posted some pictures of the rig that were in my mailbox. three of them are from hans, from andy. - farhan