开云体育

What`s the reason that I get on all bands only 2...max.3 watts output ? 73 Sent: Thursday, April 3, 2025 6:23 AM To: [email protected] Subject: Re: [BITX20] Power zero on 10m / Drive

The keyboard and pointing device I used was a BT thumb keyboard and trackpad. It works, but typing is slow due to the keys only being about 4mm across. I'm replacing that little BT keyboard with a

Hmm. You might (probably ) be right here with that no harm can happen to a system where nothing is written. Being a old Linux/UNIX-guy, I also simply get nervous doing a hard cut. -- Tilman D.

I have removed my battery holder. Looks ugly on the side of the radio. I run my radio from external 9VDC source anyway. -- Tilman D. Thulesius *SM0JZT / Sweden*

Ashhar You are probably right there- I might have done this in desperation. After having downloaded the image and flashed it to a new 32Gbyte SD-card. Put et into the radio and started the radio and

Got my "wee beastie" early this afternoon.? Unboxed it & everything looks OK.? I haven't powered it yet.? I have a few questions. I have an official Pi keyboard and mouse.? I intend to use this

After shutting down, it will still keep drawing about 150mA of power. We need a way for the linux to power down the full circuit. It can, of course, be done with capacitors, 555 timers and smoke

Hi, I don't know enough about the system and application's architecture to understand the latency issues yet. Are you using the stock Debian kernel? ?Or a kernel with real-time modifications

Matt, I have logged the 10M power output bug on github ( https://github.com/afarhan/zbitx/issues/24 ). This seems to be a software bug. The current workaround is to switch to another band (say 20M)

There's a world of possibilities once you open up the source code and start changing it - that is something the designers of this radio hope users will do with this radio... Ken, N2VIP

In theory the action could be done as well as a button in say menu option [email protected]> wrote:

So, I'd been watching another thread for resolution, but it may not be the same thing. Questions up front. 1. Any reason why 10m is 0W? 2. See my drive? it's 96, and I don't know why I can't get it to

Perhaps something like this? https://magazine.raspberrypi.com/articles/off-switch-raspberry-pi Now, if someone clever could incorporate the 6 second hold-down of the encoder switch to initiate a

I would agree with Ken. However, we are assessing the impact of this on HF Signals (which is a Delaware company that files its taxes in the USA) the impact should be minimal. We will wait and watch.If

My plug failed on like the third start. I ordered this https://a.co/d/6HrnTF9 and they transmit power fine (one to replace the failed plug and one for the power supply), but they’re slightly longer.

Please, let's keep politics off this group. There are plenty of places to discuss current events, politics, etc - as a world-wide community of of over 7,000 members, the likelihood of offending

I would have to agree with you on this point. Gerry

Who elected that addled egghead responsible for your country's problems? Gerry

I don’t think the exception applies here, but I could be wrong. The price of virtually all ham equipment just took a big jump.

Ron, I would like you to review the code: 1. https://github.com/afarhan/zbitx/blob/b9cabb446b78e02116a4310abdf1b52aa0d41f47/sbitx_gtk.c#L3798 Here, we setup the ISR (interrupt service routine) to call