So, I'd been watching another thread for resolution, but it may not be the same thing.
Questions up front.
1. Any reason why 10m is 0W??
2. See my drive? it's 96, and I don't know why I can't get it to 100. When using the wheel, it won't go any higher, though it certainly goes lower.?
These lead me to believe both are software configuration related.?
?
The problem:
I initially had the issue with FT8 locking up the zBitx. Updating the both the Zero and Pico software resolved that.
I'm at 1.6 and 3.051 now.
Running sBitx on the external monitor resulted in 0W out.?
?
However, I'd still get 0 watts out when transmitting FT8 on 10m.
?
However, I remembered I get less output on my sBitx at 10m, so I setup a 20m vertical and I got power out. I haven't had time to check 12/15/17m. Could there be a problem with the calibration files that I absolutely did not backup when I did the update?
?
Any guidance would be appreciated!
Matt
