开云体育

Can do. I will bung this into the SET(tings) of the front panel. - f [email protected]> wrote:

Thats actually a pretty good idea. When in a contact be it CW or FT8 or Voice, don't always need to have the waterfall going.

I'm using the batteries.? They are older(recovered from Laptops) batteries. So that could be the case why it's dipping.

I will design a batter cover. This is unnecessarily dangerous! -JJ

Just a thought, but what if the user could simply toggle the waterfall display off? That could be an easy way to avoid the problem until a better solution presents itself? Ken, N2VIP

You will get 5w if your power supply holds to 8.4 volts o transmit i can see from your readings that the dc supply is dipping to 6.8v on transmit. This indicates that the power supply is current

What are other seeing with the power levels? I have a QRP Labs dummy load that I connect my volt meter to get a peak voltage reading. The voltage on the radio is 7.7v, drops down to about 6.8-6.9v

The chugging sound is actually from the I2C lines to the Pico processor that is on the same board as the speaker. They are absent with the head phones. If I reduce the data running on the I2C lines

I have updated the zbitx keyer with a minor update. the new software update version of sbitx is now 3.051 (moving from 3.05). Can the cw users try out this version and let me know? I could manage

Oh -- and make sure that some sort of "split" isn't turned on. I've done that by accident more than once, and you get zero output power, if a totally different band is selected (or so it seemed to

Ben, I and others here have helped a ton of people. And many of us, like me have worked for very long periods to fix our own units! I bought two units used and I had to fix lots of things. Sometimes

Gordon, this is where HFSignals website says to post for support related issues. ?Thats what I'm doing. If you have issue with HFSignal sending technical support here, feel free to contact them on

Point of caution! Noticed the battery pigtail has bare wires exposed probably when stripping outer insulation. Could short if wires twisted. ?Easy to fix however .

Hi Ben, -- did you email HFSignals themselves (this is a user group) and inquire about returning it for a replacement (or if you prefer, refund)? Perhaps they can help you. 73 Gordon

I'm beginning to regret my decision to purchase this device. It's clearly defective and does not work and no support is being offered. If I do not receive an answer soon I'll be inquiring with

I received mine today as well, very exciting! I upgraded the software to 1.05/3.05, everything seems to work. I noticed the "chugging" as well, along with the decoder portion of the screen flickering.

The "git checkout main" fixed my problem as well. All is working properly now. I'm going to add a comment to the issue and close it, since it's working now.

My Zbitx arrived today. I am new to these radios so expect a learning curve. I have only received so far but here are my observations and questions. I installed the batteries and followed the set up

Thanks for that tip, I had completely forgot about that. Dean

Gyula, Thanks for the detailed operations but I think I answered my own question. With the new Pi4 I flashed an operating system and installed it. Insert sd card and Pi works like a Pi should but