If it won’t power on attaching a monitor will not make it work
On Mar 29, 2025 at 11:10?AM -0400, James Kvochick via groups.io <kvo@...>, wrote:
It will be interesting to see if the other processor even powers up, once you can connect ?monitor and a keyboard to it. ?If we were not a little more than 3 hours away, I would loan you cables and adapters.
?
The Raspberry Pi Pico (the CPU running the front panel when you plug into the CAT cable) can get power from other pins on the device OR the USB port you plug the computer into. ?A hunch is that since you have measured power on the battery pack, but see nothing on the screen when you apply power to the Zbitx power jack, that there is no power getting from the power connector to the rest of the radio. ?It might be something very simple like a loose or unsoldered connection on the power connector...
?
Probably good we don't live closer, I would have already been there urging you to open it up...
?
Best of luck with the Zbitx going forward,
?
73
Jim K8JK
|
It will be interesting to see if the other processor even powers up, once you can connect ?monitor and a keyboard to it. ?If we were not a little more than 3 hours away, I would loan you cables and adapters.
?
The Raspberry Pi Pico (the CPU running the front panel when you plug into the CAT cable) can get power from other pins on the device OR the USB port you plug the computer into. ?A hunch is that since you have measured power on the battery pack, but see nothing on the screen when you apply power to the Zbitx power jack, that there is no power getting from the power connector to the rest of the radio. ?It might be something very simple like a loose or unsoldered connection on the power connector...
?
Probably good we don't live closer, I would have already been there urging you to open it up...
?
Best of luck with the Zbitx going forward,
?
73
Jim K8JK
|
Re: zBitX radio hanging randomly.
Stands for “On The Go”.?
?
?
?
|
Re: zBitX radio hanging randomly.
Duh, I should have figured that out. Thank you for the help.
?
Thanks again,
Robert, AG6LK
|
Good morning
?
My zBitx arrive DOA.? I sent a message HFSIGNALS but got no response.? It will not power up with the connector in place.? I used my multimeter to test the power on the connector from the fully charged batteries and it is 8.33v, so the power source is good.? The radio will not come on.? I can bring up the screen with the CAT port so that is all.? ?I think I need to exchange it.? How do I get that started.? This is very disappointing
?
https://youtu.be/I2fcVvsSaQQ?si=KRBCrjFCZKEzHMk-
?
Mike,, N4GW
|
Back to basics - 20 meter SSB - all analog - all the way
Hi all -
?
While everyone has been busy with s and the z I've gone back to basics with a bitx20 inspired, all-analog SSB rig.? ?In a fit of "spontaneous construction" [(C) N2CQR] I put togeter the receiver over a couple of days.? The VFO is a 9MHz rescue puppy from an FT-401 (thaks Pete, N6QW for the $35 eBay find). The Tx PA was already built - leftover from one of my revs of a homebrew sBitx. Audio amp and first mixer came out of a box I call "boards that could be rigs."? ?Had to wait for 5Mhz crystals to arrive from Mosuser so I put most of the rest of the rig together including a crystal controlled BFO (with a junk box crystal).? TIA IF amplifiers using boards from Todd at MostlyDIYRF.? ?This rig has soul!? Crystals arrived - built the ladder filter with help from the Dishal software, subbed out the junk box crystal in the BFO for one of the extra 5MHz crystals and the rig received great first thing.? Something that has never happened to me before, ever.
?
?
This has been so much fun..... the transmitter should be done this weekend - if my luck continues I will brand this the Miracle 20!
?
73,
Dean
KK4DAS
|
Re: zBitX radio hanging randomly.
OTG stands for "on the go" It's use is usually associated with USB adapters to used connect peripherals to smart phones.
|
Re: Z bitx when is the order page to re-open
Email <sales at HFSignals dot com> and ask them to be put on the list and notified when sales are open.
?
73
Evan
AC9TU
|
Z bitx when is the order page to re-open
Wondering when it would be possible to order a z bitx ?
Thanks
|
Re: zbitx getting ready to be shipped ...
Hi
?
?20% in France either about 33�...
?
Will see 1 april for me
?
73
Patrick
?
?
|
Re: zBitX radio hanging randomly.
|
Re: zbitx getting ready to be shipped ...
I wonder how much VAT and DHL is...
?
73'
?
|
Re: zBitX radio hanging randomly.
I know this is probably a dumb question but what does “OTG” stand for? I don’t think I’ve ever heard of it.?
Tanks,
Robert AG6LK
|
The term is "iambic", pertaining to a dihDAH dihDAH dihDAH pattern, each of the three sounds in the above called an "iamb". This are "I" as in India, not "L" as in Lima.
Also, "Lambic" is a real thing. A Lambic is a beer or ale to which wild yeasty beasties are introduced to the wort by exposing it to natural wind and breezes. It's the sourdough of beer. It's easy to find combined with fruit juice or extract, apricots, peaches, and cherries are popular. I love cherry Lambic, and the beer drink called a "Dirty Hoe", composed of raspberry or cherry Lambic and Hoegaarden wheat beer.?
73, Gwen, NG3P?
|
Re: Zbitx external microphone recommendations
Right. There is a reason why this pinout is not the normal one.
?
Would love to reroute my radio connector so that i can use my microphones without having to put a adapter cable inbetween.
--
Tilman D. Thulesius
SM0JZT / Sweden
|
Re: The Pi zBitx process is locking when I select an FT8 station
Wouldn't miss it for the world, Gordon! I just got a 9v PD trigger cable that works perfectly, and I got an 8-pack of 18650 cells and a 4-place charger. 3300mAh and 4.2 volts. And I find that the hand mike for my KX3 *does* work perfectly in it!
Now, if I could only operate FT8 properly!
-=-=-=-=-=-=-=-=- 73, Gwen, NG3P
|
Re: The Pi zBitx process is locking when I select an FT8 station
The joys of bringing out a new product!
Gordon kx4z?
toggle quoted message
Show quoted text
On Mar 28, 2025, at 18:45, Gwen Patton via groups.io <ardrhi@...> wrote:
? ?I have added this issue to the Github bug report page. It is issue #6.
?
73,
Gwen, NG3P
|
On Fri, Mar 28, 2025 at 03:58 PM, Gerald wrote:
I have tried CW with an external keyer of type K3NG and cw_input set to straight on the zBITX. But with no success.
Same.
?
John AE5X
?
|
Re: zbitx hung-up on startup
That's easy to fix to an obvious error.
Bill
K9YEQ
Scottsdale, AZ
toggle quoted message
Show quoted text
I saw someone mention that the two terminals on the battery were not connected. To chain the 2 batteries together. Maybe it was a step that was skipped in manufacturing.? 
On Fri, Mar 28, 2025 at 11:10?AM Astro-Nights with Mike Christiansen via
<starmke1998= [email protected]> wrote:
The connector will not help if the radio wont power on.? I tested the batteries and the connector and they have power, but when I plug it into the radio it will not power on.? It is DOA
On Mar 28, 2025, 10:01 AM -0400, Ashhar Farhan via
<farhanbox= [email protected]>, wrote:
Oh heck. You would have received a usb adapter to connect to regular usb devices. But you will need a mini hdmi to connect to a monitor.
On Fri, Mar 28, 2025, 7:03 PM Astro-Nights with Mike Christiansen via
<starmke1998= [email protected]> wrote:
Mine is hung but will not power up off batteries.? See the video.? All the ports are not standard.?
?
On Mar 28, 2025 at 7:39?AM -0400, Tilman, SM0JZT via
<sm0jzt= [email protected]>, wrote:
I had a similar thing with the radio hung up after about 30 minutes of operation.? That was with FW 1.02.
After updating to 1.0.4 in RPI and frontpanel all runs nicely.?
--
Tilman D. Thulesius
SM0JZT / Sweden
|
Re: The Pi zBitx process is locking when I select an FT8 station
?I have added this issue to the Github bug report page. It is issue #6.
?
73,
Gwen, NG3P
|
James Kvochick
Robert Fairbairn
HA3HZ
Gwen Patton
Tilman, SM0JZT