开云体育

All, Note that posting to this thread will not put you on a list to be notified when the zBITX ordering is open.? ?There will be a post for the group when orders are accepted.? See this

Same for me inform me please when zbitx can order again THANKS 73 Op 26 mrt 2025 14:55 schreef "Ralph Perreca via groups.io" <ralphperreca@...>: Hi please let me know when I can order

Raghav, Is there any chance that you can upload the SD card image , zipped, on some site. You have one uploaded for sBITX. de Charudatt VU2UPX [email protected]> wrote:

If you are looking for a solution thats POTA/SOTA friendly, you can try either one of these three options: 1. 3d print a portable microphone such as this. (

Neil, The connectors are (from left to right): 1. Type C USB for powering the Raspberry Pi 2 & 3. Micro HDMI ports for connecting HDMI displays/Monitors/TV. There are two ports for dual displays 4.

Gwen, I'm not sure if you have updated your zBitx to the latest software and firmware. To do a firmware update, you will need to follow the procedure mentioned by Farhan in this post (

Matjaz, We are shipping out the units in batches, as mentioned by Farhan in a previous message ( /g/BITX20/message/116466 ). You should receive an email with the tracking information

Those are the connectors directly on a pi4. ?Usb c is power only to the pi, ?other 2 are hdmi outputs and the last is the pi 4 audio jack. ?You can look up documentation on a pi 4 for more

Yup thats where I found a few. I was just about to log some on github [email protected]> wrote:

I expect edge-case bugs on the user interface. There wasn't enough time to test them. I rewrote the console and the waterfall entirely over the weekend. That's where the dragons be.

zbitx github would be best - f [email protected]> wrote:

As the zBitx have started to be delivered would it be possible to download the manual without owning one unit? This would be useful to help us to decide and order one unit when they will be again

Thank you! I get it. Simple as replacing the plug, made something simple, complex. Oh well. [email protected]> wrote:

What seems to be the most practical external microphone for the Zbitx? Thinking about one for POTA or SOTA.

Hey Farhan, what would be the best way to report bugs, on the groups or over on the zbitx github?

Tom, It shows the tubes only on the HDMI screen. Does the software run on the HDMI screen? If it doesn't run, then there will be a black terminal window (on the HDMI screen) with some error message.

Gwen, you should upgrade the firmware on the pico as well as the software on the raspberry pi? Here is how you do it: First, do this https://youtu.be/ZA8nDAVmSE0?si=UdjyYah7BSgN8r7S Then, this

It never displays the tubes, although if I plug a monitor into the HDMI, it shows the tubes. The zbitx continues to display the screen shown. Tom Crowley

What are these connectors - both what kind of connector (one I believe is USB-C) and purpose

Ok. I may have one of those keyboard/trackpad combos somewhere. If I don't, I'll get one. I think I was confusing the method for sending the updated display firmware to the pico with connecting a