Re: zbitx hung-up on startup
|
It never displays the tubes, although if I plug a monitor into the HDMI, it shows the tubes.? The zbitx continues to display the screen shown.
Tom Crowley KT4XN
toggle quoted message
Show quoted text
What does it show on the screen? Can you send us a screenshot of your HDMI screen about 30 seconds after it displays the "tubes"?
On Thu, Mar 27, 2025 at 7:28?AM Tom Crowley KT4XN 1738 via
<crowleytj= [email protected]> wrote:
Updated the firmware.? Plugged in a HDMI screen Still after 10 minutes no joy.? I'll try a few more things, then set it on the shelf and hope a solution shows up.? It's been recycled many, many times still no joy, have the same message that it's booting.
Tom KT4XN
Updated the firmware.? Plugged in a HDMI screen Still after 10 minutes no joy.? I'll try a few more things, then set it on the shelf and hope a solution shows up.? It's been recycled many, many times still no joy, have the same message that it's booting.
Tom KT4XN
As said above mine is 20-30 seconds.??
Have you restarted the radio.?
If that doesn't work.? Try to connect to a monitor via the HDMI cable and connect to the wife and do the updates?
?
On Wed, Mar 26, 2025, 8:38?PM Tom Crowley KT4XN 1738 via <crowleytj= [email protected]> wrote:
10 minutes and it's still hung-up with the message.??
Tom KT4XN
Takes 30" to boot with V1.04.
|
