Re: Special uBITx deployed!
Great work Bill!?
On Thursday, March 29, 2018, 3:47:25 PM CDT, K9HZ <bill@...> wrote:
Thanks to my friend Frans J69DS, freshly built uBITx radios were given to two well deserving young ladies on the island of St. Lucia yesterday.? They are part of the Youth On The Air (YOTA) movement on J6 and now you can listen for them on their own radios.? Getting the radios to them had its challenges but they are very happy to have them!? See attached pictures!? We have more radios to give away too! ? ? ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton ¨C J68HZ Soufriere, St. Lucia W.I. Rent it: Like us on Facebook! ? Moderator ¨C North American QRO Yahoo Group. ? email:? bill@... ? ?
|
Re: uBITX Firmware CEC Version 1.06 Release (Added WSPR)
#ubitx
Oh yes move it to the root directory!!! I dis that as a matter of fact. ?I moved two additional files too. ?Away from my computer so cant remember.?
Dr.?William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it:
email:??bill@... ?
toggle quoted message
Show quoted text
On Mar 29, 2018, at 5:24 PM, w7hd.rh < w7hd.rh@...> wrote:
I've tried re-downloading it three times now.?? The problem is in
ubitx_wspr.cpp.? For some reason it isn't finding the arduino.h
file (which exists in several places on my system.? That file is
not referenced in ubitx-1.04.? So how do I get 1.06.1 to find one
of them?
/home/ronh/.arduino15/packages/arduino/hardware/avr/1.6.21/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
/home/ronh/.arduino15/packages/arduino/hardware/avr/1.6.21/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
/home/ronh/Radios/bitx/arduino-1.8.5/libraries/WiFi/extras/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
/home/ronh/Radios/bitx/arduino-1.8.5/libraries/WiFi/extras/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
Or do I need to re-install
arduino-1.8.5?
On 03/29/2018 03:08 PM, K9HZ wrote:
I believe that. ?
Dr.?William
J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ
?
Owner -
Operator
Big Signal
Ranch ¨C K9ZC
Staunton,
Illinois
?
Owner ¨C
Operator
Villa
Grand Piton - J68HZ
Soufriere,
St. Lucia W.I.
Rent it:
email:??bill@...
?
On Mar 29, 2018, at 4:34 PM, w7hd.rh < w7hd.rh@...>
wrote:
nope - it looks like I have a bad download.
Ron W7HD
On 03/29/2018 02:16 PM, Joel
Caulkins wrote:
Change your
board setting to Nano and your programmer setting to AVR ISP
and it should compile, mine did.
Joel
N6ALT
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
|
Re: uBITX Firmware CEC Version 1.06 Release (Added WSPR)
#ubitx
I've tried re-downloading it three times now.?? The problem is in
ubitx_wspr.cpp.? For some reason it isn't finding the arduino.h
file (which exists in several places on my system.? That file is
not referenced in ubitx-1.04.? So how do I get 1.06.1 to find one
of them?
/home/ronh/.arduino15/packages/arduino/hardware/avr/1.6.21/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
/home/ronh/.arduino15/packages/arduino/hardware/avr/1.6.21/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
/home/ronh/Radios/bitx/arduino-1.8.5/libraries/WiFi/extras/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
/home/ronh/Radios/bitx/arduino-1.8.5/libraries/WiFi/extras/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/arduino.h
Or do I need to re-install
arduino-1.8.5?
On 03/29/2018 03:08 PM, K9HZ wrote:
I believe that. ?
Dr.?William
J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ
?
Owner -
Operator
Big Signal
Ranch ¨C K9ZC
Staunton,
Illinois
?
Owner ¨C
Operator
Villa
Grand Piton - J68HZ
Soufriere,
St. Lucia W.I.
Rent it:
email:??bill@...
?
On Mar 29, 2018, at 4:34 PM, w7hd.rh < w7hd.rh@...>
wrote:
nope - it looks like I have a bad download.
Ron W7HD
On 03/29/2018 02:16 PM, Joel
Caulkins wrote:
Change your
board setting to Nano and your programmer setting to AVR ISP
and it should compile, mine did.
Joel
N6ALT
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
|
I don't object to a lot of posts about when things ship.
But an alternative would be for Mike to put a note next to that shipping status on the ubitx.net home page
stating folks should email him when they learn about a rig getting shipped rather than posting to the forum.
I rather like photos of dogs, gives everyone permission to give priority to function over form
on the first pass.? Best to get these things going quick in an ugly manner, get a feel for where
the controls and connectors should be, think about optional hacks.
Only then start cutting holes in the $30 extruded aluminum box that took a month to arrive.
Zoom in on this workbench photo of the late great Jim Williams of Linear Tech,
six images down,?see how a real pro goes about it:
? ??
Jerry, KE7ER
??
On Thu, Mar 29, 2018 at 02:38 pm, Mike Woods wrote:
Dgyuro and everybody really
I just want to make it clear that is not affiliated with HF Signals, and the way that I get information on shipping dates is from this list like everybody else!
There was a bit of reaction to constructors posting their shipping notices on the list a week or two ago, which led to the date of 24 January remaining unchanged for a week or more. A recent post showed that HF Signals had shipped a 1 Feb 2018 order, so the info has been updated.?? I think it has proved helpful for people to post when they have received notice that their order has been shipped.? It is less helpful to know when it has arrived (because this depends on shipping method and country).
I think it may be helpful for those waiting if I were to estimate where HF Signals is up to with shipping (they seem to be running around 2 months behind incoming orders still).?? I will do that daily, correcting the data when a posting is made of an actual shipping date.??
It's great to see people's builds.? I am putting these up on ubitx.net in the gallery section.? Many constructors find it helpful to look at other people's ideas for panel layouts, case type, etc. before committing to their own build.? "Dogs" may be the exception!
73 Mike ZL1AXG ubitx.net
|
Re: uBITX Firmware CEC Version 1.06 Release (Added WSPR)
#ubitx
I believe that. ?
Dr.?William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it:
email:??bill@... ?
toggle quoted message
Show quoted text
On Mar 29, 2018, at 4:34 PM, w7hd.rh < w7hd.rh@...> wrote:
nope - it looks like I have a bad download.
Ron W7HD
On 03/29/2018 02:16 PM, Joel Caulkins
wrote:
Change your board
setting to Nano and your programmer setting to AVR ISP and it
should compile, mine did.
Joel
N6ALT
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
|
Dgyuro and everybody really
I just want to make it clear that is not affiliated
with HF Signals, and the way that I get information on shipping
dates is from this list like everybody else!
There was a bit of reaction to constructors posting their shipping
notices on the list a week or two ago, which led to the date of 24
January remaining unchanged for a week or more. A recent post
showed that HF Signals had shipped a 1 Feb 2018 order, so the info
has been updated.?? I think it has proved helpful for people to
post when they have received notice that their order has been
shipped.? It is less helpful to know when it has arrived (because
this depends on shipping method and country).
I think it may be helpful for those waiting if I were to estimate
where HF Signals is up to with shipping (they seem to be running
around 2 months behind incoming orders still).?? I will do that
daily, correcting the data when a posting is made of an actual
shipping date.??
It's great to see people's builds.? I am putting these up on
ubitx.net in the gallery section.? Many constructors find it
helpful to look at other people's ideas for panel layouts, case
type, etc. before committing to their own build.? "Dogs" may be
the exception!
73 Mike ZL1AXG ubitx.net
On 30/03/18 7:25 AM, Dgyuro via Groups.Io wrote:
Most of us have been patient and didn¡¯t complain. He has posted on
web site what order date was shipping. I think he is trying to
solve a few problems. 4000 in a few months from India not bad. Be
patient ?I waited 2 months. ?
On Mar 29, 2018, at 11:07 AM, Gordon Gibby < ggibby@...>
wrote:
Sigh. So, this forum constitutes daily notification that
you¡¯re going to have to wait a long time to get one of these
devices.?
They are ?being made in a far part of the world, (what
some of us might even consider third world), and the
building is partially done by indigenous population.
They¡¯re selling for a fraction of what they¡¯re worth.
Maybe if we took up a collection, or they raise the
price considerably, they could hire a clerical person just
to do all these notifications to the multiple thousands
purchasers. I agree with you that I think that could be
done by a clerical person. ?There are ?probably in excess
of 1000 kit back order right now, and so an email to each
of the thousand purchasers could be sent out every day
notifying them of their projected mailing date. ?
In general it¡¯s a couple months, but it could be
shorter or longer, and it could change if they suddenly
run out of toroid, which has happened, or if a batch of
components is defective. ?Clerical personnel ?could keep
everyone up-to-date on this.
Let¡¯s see, a database to keep track of all the orders,
process endpoints & thresholds ?reached by each
batch,, inventory monitoring,?a email sent to each person
at about one minute per person per email.
60 emails per hour, 16 hours of work per day, now we
need to or 2 1/2 FTE 16 hours of work per day, now we need
two or 2 1/2 FTE. But we also need a database person to
keep the database working....
Hmmmmm. ? Dunno......
ok, I`m also still waiting.
I can understand that if parts are missing there would
be a delay, what I can not understand is the way of
"communication". It should not be any problem to
inform buyer about the delay with an e-mail, if
someone think that this is too much work, simply with
an announcement in this forum or on the web page.
?No information, but collecting money, makes buyers
not happy and the risk that they will escalate this
behaviour to pay-pal will increase with the risk that
the easy possibility to order and pay will be stopped.
|
Re: uBITX Firmware CEC Version 1.06 Release (Added WSPR)
#ubitx
nope - it looks like I have a bad download.
Ron W7HD
On 03/29/2018 02:16 PM, Joel Caulkins
wrote:
Change your board
setting to Nano and your programmer setting to AVR ISP and it
should compile, mine did.
Joel
N6ALT
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
|
Re: uBITX Firmware CEC Version 1.06 Release (Added WSPR)
#ubitx
That works okay under 1.04 but not 1.06.1.??? I will try
re-downloading 1.06.1.
Ron W7HD
On 03/29/2018 12:49 PM, K9HZ wrote:
Arduino
Nano¡.
?
?
Dr.
William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ
VP5/K9HZ PJ2/K9HZ
?
Owner
- Operator
Big
Signal Ranch ¨C K9ZC
Staunton,
Illinois
?
Owner ¨C
Operator
Villa
Grand Piton ¨C J68HZ
Soufriere,
St. Lucia W.I.
Rent it:
Like us on Facebook!
?
Moderator
¨C North American QRO Yahoo Group.
?
email:?
bill@...
?
?
?
What device are you compiling for?? What are your settings in
Sketch?? Can you guess at what I'm doing wrong?
I haven't had a problem before on previous builds.
Ron W7HD
?
On 03/29/2018 11:00 AM, K9HZ wrote:
Complied
fine for me¡? Just turning the display into I2C device
?
?
Dr.
William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ
VP5/K9HZ PJ2/K9HZ
?
Owner
- Operator
Big
Signal Ranch ¨C K9ZC
Staunton,
Illinois
?
Owner ¨C
Operator
Villa
Grand Piton ¨C J68HZ
Soufriere,
St. Lucia W.I.
Rent
it:
Like us on
Facebook!
?
Moderator
¨C North American QRO Yahoo Group.
?
email:?
bill@...
?
?
?
Note the
missing aruino.h in
/tmp/arduino_build_180892/sketchubitx_wspr.cpp.
1.0.6.1 Just copied from Sourceforge!
Ron W7HD
On 03/29/2018 06:34 AM, Ian Lee wrote:
Howard
Below is a link to Version 1.061.
You can download Hex files and
sources in the release section of github.
And github now has the latest
version (it is correct to have Version 1.061)
I have not yet reflected in the
README.md document.
I will fix the document now because
you told me. Thank.
I am currently experimenting with
various applications with uBITX.
?
2018-03-29 20:58 GMT+09:00 DrZ <zehrhj2@...>:
Ian
I may be missing something, but I don't see the link
to 1.061 in the announcement on your website.? I can
find it on Github, but I always find it hard to be
sure I'm getting the latest version since the Github
listing is always the same.? In the version history
I found associated with the latest file, 1.04 is the
last one documented. ?
Thanks
Howard K4LXY
?
--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
(my blog)
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
--
Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320
Editor OVARC newsletter
|
Re: Ubitx sticks on transmit
I had this exact same problem and found that I had high SWR on my 20 meter antenna and the RF was getting back into the uBitx, when I solved my antenna issues the stuck TX problem went away.
Joel
N6ALT
|
But but I spent money! Why don't I get everything I want!?
|
Re: Special uBITx deployed!
Nice! On Thu, 29 Mar 2018 15:47:05 -0500 "K9HZ" <bill@...> wrote: Thanks to my friend Frans J69DS, freshly built uBITx radios were
given to two well deserving young ladies on the island of St. Lucia
yesterday. They are part of the Youth On The Air (YOTA) movement on
J6 and now you can listen for them on their own radios. Getting the
radios to them had its challenges but they are very happy to have
them! See attached pictures! We have more radios to give away too!
Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ
Owner - Operator
Big Signal Ranch - K9ZC
Staunton, Illinois
Owner - Operator
Villa Grand Piton - J68HZ
Soufriere, St. Lucia W.I.
Rent it: <> www.VillaGrandPiton.com
Like us on Facebook! <>
Moderator - North American QRO Yahoo Group.
email: <mailto:bill@...> bill@...
---
This email has been checked for viruses by AVG.
|
Re: uBITX Firmware CEC Version 1.06 Release (Added WSPR)
#ubitx
Change your board setting to Nano and your programmer setting to AVR ISP and it should compile, mine did.
Joel
N6ALT
|
Re: Special uBITx deployed!
You guys are great! HAM radio operators are the best.
Randy
|
Re: Special uBITx deployed!
Just out of curiosity, what are they going to do for antennas?? Do you modify the software so they can only transmit on frequencies legal in their license class and/or location?? I'm not trying to play hall monitor I am genuinely curious.
|
Re: Special uBITx deployed!
Very cool to have done that, congrats!
Perhaps once officialdom there sees how these first few units play out,
any future rigs will have clear sailing.
Considering the impact of the 2017 hurricane season on some of the other islands,?
they would do well to encourage ham radio in any way they can.?
Jerry, KE7ER
toggle quoted message
Show quoted text
On Thu, Mar 29, 2018 at 01:47 pm, K9HZ wrote:
Thanks to my friend Frans J69DS, freshly built uBITx radios were given to two well deserving young ladies on the island of St. Lucia yesterday.? They are part of the Youth On The Air (YOTA) movement on J6 and now you can listen for them on their own radios.? Getting the radios to them had its challenges but they are very happy to have them!? See attached pictures!? We have more radios to give away too!
?
|
Thanks to my friend Frans J69DS, freshly built uBITx radios were given to two well deserving young ladies on the island of St. Lucia yesterday.? They are part of the Youth On The Air (YOTA) movement on J6 and now you can listen for them on their own radios.? Getting the radios to them had its challenges but they are very happy to have them!? See attached pictures!? We have more radios to give away too! ? ? ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton ¨C J68HZ Soufriere, St. Lucia W.I. Rent it: Like us on Facebook! ? Moderator ¨C North American QRO Yahoo Group. ? email:? bill@... ? ?
|
Re: WSPR built-in software plans?
#ubitx
@Steve P
How are things moving along?
I believe I found your work here?
Nigel.
|
If you happen to wire the pot up such that the wiper is either 5v or ground,
then smoke will ensue when you turn the knob to one of the extremes
That shorts 5v to ground through the extreme end of the pot element.
Might well ruin the pot.
toggle quoted message
Show quoted text
On Thu, Mar 29, 2018 at 12:58 pm, Allard PE1NWL wrote:
Keith,
this picture shows how the 10-turn pot should be wired up:
Measure the voltage across the violet wire (slider) and the yellow wire
(ground). It should be ranging between 0 and +5V depending on the pot
position.
|
Keith,
this picture shows how the 10-turn pot should be wired up:
Measure the voltage across the violet wire (slider) and the yellow wire
(ground). It should be ranging between 0 and +5V depending on the pot
position.
73 Allard PE1NWL
toggle quoted message
Show quoted text
On Thu, March 29, 2018 21:32, AG??H wrote: I recently completed putting together my BitX40 kit.??The only
modification I made to it was substituting a 10K-10 turn potentiometer for
the original pot.??I obtained the kit last December and the original
sketch has NOT been replaced in the Raduino.
The time arrived to supply power to the kit.??As I did so, the kit came
alive with a few squeals, howls and ticking noises and then settled
down.??I had no indication on the display screen.??
So, I powered down and remembered that I had read in the forum to check
out the Raduino by removing it from the kit and powering it up with the
Arduino IDE program.??To make a long story short, I did that and the
display immediately came alive with a display.??I checked my wiring in the
kit and that was as it should be, i.e. the correct wires were hooked up to
the correct pins and all grounds were in place.??
I put back the Raduino into the case and hooked up the two connectors and
again applied power.??This time, the display lit up and the display ticked
up to 7.100 and remained there. There was no change in the display
frequency as I moved the tuning shaft. I powered down the unit and
unplugged the tuning control from the Raduino.??I checked the 10K pot for
resistance??and could see that it was operating correctly although it
seemed that I needed to reverse the outer wires, leaving the violet wire
connected to the wiper. (I changed the wire positions because the 1 turn
pot outside connections were reversed comparing it to the 10 turn pot.
When I powered it up, this time the display ticked DOWN to 6.999. Turning
the tuning shaft again resulted in no change to the displayed frequency.
In searching the forum for ?€?BitX40 tuning problems, I came up with a
posting written by Allard (for version 1.04) concerning the optional use
of a 10 turn tuning pot.??He writes that two lines of code in the sketch
need to be changed to allow smooth operation across the entire band.??
Is my failure to change those two lines of code the reason why I can?€?t
change the frequency on my display or are there are there other problems
that would cause this?
BTW, I do have adequate audio and a change in RF noise is very prominent
when I attach an antenna.
Thanks for any and all suggestions?€?.Keith -????AG??H
|
Re: uBITX Firmware CEC Version 1.06 Release (Added WSPR)
#ubitx
Arduino Nano¡. ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton ¨C J68HZ Soufriere, St. Lucia W.I. Rent it: Like us on Facebook! ? Moderator ¨C North American QRO Yahoo Group. ? email:? bill@... ? ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of w7hd.rh
Sent: Thursday, March 29, 2018 1:27 PM
To: [email protected]
Subject: Re: [BITX20] uBITX Firmware CEC Version 1.06 Release (Added WSPR) #ubitx? What device are you compiling for?? What are your settings in Sketch?? Can you guess at what I'm doing wrong? 
I haven't had a problem before on previous builds. Ron W7HD ? On 03/29/2018 11:00 AM, K9HZ wrote: Complied fine for me¡? Just turning the display into I2C device ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton ¨C J68HZ Soufriere, St. Lucia W.I. Rent it: Like us on Facebook! ? Moderator ¨C North American QRO Yahoo Group. ? email:? bill@... ? ? ? 
Note the missing aruino.h in /tmp/arduino_build_180892/sketchubitx_wspr.cpp.
1.0.6.1 Just copied from Sourceforge! Ron W7HD
On 03/29/2018 06:34 AM, Ian Lee wrote: Howard Below is a link to Version 1.061. You can download Hex files and sources in the release section of github. And github now has the latest version (it is correct to have Version 1.061) I have not yet reflected in the README.md document. I will fix the document now because you told me. Thank. I am currently experimenting with various applications with uBITX. ? 2018-03-29 20:58 GMT+09:00 DrZ <zehrhj2@...>: Ian
I may be missing something, but I don't see the link to 1.061 in the announcement on your website.? I can find it on Github, but I always find it hard to be sure I'm getting the latest version since the Github listing is always the same.? In the version history I found associated with the latest file, 1.04 is the last one documented. ?
Thanks
Howard K4LXY
?
--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
(my blog)
-- Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320 Editor OVARC newsletter
-- Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320 Editor OVARC newsletter
|
K9HZ
Joel Caulkins/N6ALT
Allard PE1NWL