开云体育

I find mine very functional for what it is…Do not expect a FT-891, but if you are concerned about functionality, I will tell you mine works better than I expected. Mine is primary for digital modes,

I finally got on the air(portable) yesterday to do some FT8 running Drive@100 for about 45min on 20M and didn't overheat (the back was warm, but nowhere close to hot). The swr was 1:1 into a 17ft

Frank, thanks for the info. However, based on what I am reading, most of this radio’s claimed features are non-functional. CW appears to be unusable in most cases, and I am seeing reports of thermal

At 8.4v(Batts) i'm seeing about 5w on tx [email protected]> wrote:

There are so many things to improve in the firmware, at least I still resist asking for a unit! I'll wait until things become usable. It's not a complaint—I admire the work of the developers. I know

In order to get around any issues with the zbitx overheating, I placed this heat sink on the back. Heatsink 100x60x10MM / 3.93''x... https://www.amazon.com/dp/B0867YGN3M?ref=ppx_pop_mob_ap_share I

I was playing around on FT8 yesterday (just got the radio) at 2 watts and was surprised at how hot the radio got and quickly

Order# 3764 shipped on 5/7 -- 73 clyde K4YWI

Fascinating! The CW area seems to be the one with the issues so far, so many may not need this. But an interesting upgrade option! Good portions of the problem have already been solved by software, so

Haven't opened the zBitx yet, but the adxa zero 2 pro could be the answer to the 'slow' problem. It has more memory, a faster cpu, 16Gb or 32Gb EMMC ...

Hi all, I updated the firmware and software to the latest and Im getting errors in my cli window. any advise? thanks Miguel

The gestation period for zBitx is far less than for most other species with no need to worry about feeding schedules.

Hi all, from what I've understood about the timing issues with CW on zbitx, it seems that the CPU load is at least part of the problem. I personally would love an option to switch off the waterfall

link https://k0tbs.net/ is "unreachable" with Chrome and iMac -- 73 di IW4AJR Loris

Hi there I ordered my ZBITX back in November 2024 when it was launched. Fantastic little thing with a interesting potential. Combining HF with known platform ( Rspberry PI ). Of course, I got my unit

I have a new uBITX, and I have flashed it with the N8ME v.02 that has the night pallet option. When I switch the keyer from hand to Iambic A, even if I save, it seems to forget this setting. Does

Frank, Once you get into Transmit Mode, it will stay in that mode until you stop keying for the 500 ms that you have your delay set to.? ?It may stutter getting onto Transmit Mode, but whenever you

Hi, If I am running at 9V, and I am transmitting FT8 at 100%, what output power are you expecting and how much power is the device consuming? Cheers, Ben

Ragav Thanks for the update.? I dont think anyone is in despair as someone mentioned.? I think we are more in anticipation as we get very close to getting the "shipped" email.? I still get excited

Steve, I received my zBitx yesterday and CW works surprisingly well, considering all comments of the last few weeks. At least, when selecting Iambic. I can’t handle Iambic B, but maybe that’s my