开云体育

Hey Farhan, what would be the best way to report bugs, on the groups or over on the zbitx github?

Tom, It shows the tubes only on the HDMI screen. Does the software run on the HDMI screen? If it doesn't run, then there will be a black terminal window (on the HDMI screen) with some error message.

Gwen, you should upgrade the firmware on the pico as well as the software on the raspberry pi? Here is how you do it: First, do this https://youtu.be/ZA8nDAVmSE0?si=UdjyYah7BSgN8r7S Then, this

It never displays the tubes, although if I plug a monitor into the HDMI, it shows the tubes. The zbitx continues to display the screen shown. Tom Crowley

What are these connectors - both what kind of connector (one I believe is USB-C) and purpose

Ok. I may have one of those keyboard/trackpad combos somewhere. If I don't, I'll get one. I think I was confusing the method for sending the updated display firmware to the pico with connecting a

This may help you out : https://github.com/drexjj/sbitx/wiki/sBitx-Microphone-Alternatives

Still available?

If you have a keyboard with a mouse pad on it, you connect the usb connector(from the keyboard) into the OTG dongle into the zbitx. If you don't have a keyboard with the mouse, you may need to use a

I'm confused. You use the OTG dongle and microUSB to the CAT for a keyboard and mouse? Wouldn't you use a USB-C cable to connect a keyboard and mouse, or do those only go to the Pico running the

D'oh. Looks like I was imagining things when I thought the barrel was smaller. Turns out it's 5.5x2.5, or 5.5x2.1, whichever is usual. Because that's what I got a bunch of pigtails for, and put

What does it show on the screen? Can you send us a screenshot of your HDMI screen about 30 seconds after it displays the "tubes"? <crowleytj@...> wrote:

Updated the firmware. Plugged in a HDMI screen Still after 10 minutes no joy. I'll try a few more things, then set it on the shelf and hope a solution shows up. It's been recycled many, many times

Did you also try this front panel FW update https://youtu.be/Ii7MHGMr_dE?si=VGyaNnzLcMsEiXHP <crowleytj@...> wrote:

Thanks, David. I think I understood all that. I'll try it tomorrow.

I ordered a PD USB-C -> 9V tonight. But I ordered it with the fairly standard 5.5x2.5 barrel plug. Not realizing the zBitX used a WAY smaller barrel. What IS that size, anyway? I'll see if I have an

Updated the firmware. Plugged in a HDMI screen Still after 10 minutes no joy. I'll try a few more things, then set it on the shelf and hope a solution shows up. It's been recycled many, many times

https://www.batteryjunction.com <https://www.batteryjunction.com/checkout/cart/> has a good selection of 18650 rechargeable flat-top unprotected batteries and chargers at good prices. My zBitx works

To update the time. Connect to the HDMI port a monitor and using the OTG dongle to keyboard and connect the radio to your wifi and it will take the time up [email protected]> wrote:

As said above mine is 20-30 seconds. Have you restarted the radio. If that doesn't work. Try to connect to a monitor via the HDMI cable and connect to the wife and do the