开云体育

The item is traceable on ebay.ca also. I saw just now.

Please see item number 291604842607? on ebay.com. Around 18 months back i bought 10 lot? at 7.5$

Well, you may not see any reason to have it, but I do. Local buffer space is allocated on the stack, which means it contains garbage when the buffer space is created. The strcat() functions work by

I see no reason to do the memset in this function.? Removed it.? Less program space used and less processing cycles. Added a rounding option, that is commented out.? More program space and

Hey Joel, I got enough parts that I could finally got back to this. I believe I found the source of the weirdness you saw. The issue was primarily three-fold: * Per

well a few things to check.? since SSB is working, you must have the 4.7k resistor installed, otherwise PTT would not work. of course check your wiring to the key jack.? a short circuit across the

I can answer you, the mike has 2 connections, the ptt switch has 2 connections, for the mic one of the connections on the base goes to the metal body of the mic and should be connected to

Totally amazing the things hams are doing nowadays. This video linked from the site is a good explanation of the radio transcever. https://www.youtube.com/watch?v=qlgq52IIUo8 The idea of implementing

After trying various software versions on my ver 5 uBitx, the KD8CEC v1.20 brought my uBitx to life, SSB works great had good reports on 20 m, all signals sound good on other bands, and the memory

I bought a batch of 10k audio pots a while ago. The one that came with the first BITX40 broke the shaft when the case I stuffed it in got slightly dropped. Can still turn it with the remaining shaft,

SOLD!

While waiting for delivery of a physically appropriate pot for a uBitx-v6 (whatever that is, I defer to those with a v6), just about any pot within 50% of 10k (or perhaps worse, try it!) will work

Hi Folks, For #3,4 & 5 below I think the Hermes Lite 2 project is good bang for the buck ($225). And You get an excellent little SDR Transceiver as well. Open Source SW and HW. www.hermeslite.com For

Greetings. I still have the one BitX40 radio with case for sale...Includes working and tested board set with Allard's firmware update and brand new unassembled case kit from INKITS. Complete with all

Note the delivery date...it's probably coming from China. These people are great and have quick service! Potentiometers-Audio | | | | | | | | | | | Potentiometers-Audio The Zen Cart? Team and others

This one looks like a pretty good guess.? Anyway, it won't cost much to find out :

A three wire AC plug seems an excellent (ie, free!) choice for personal use. Could key it by soldering a copper tube over the ground lug, and trimming the ground lug socket off of the mating power

Rob, I'm guessing that your replying to my post of over two years ago: /g/BITX20/message/36989 about this $10 case:

I agree about the defaulting the EEPROM idea, Jerry.? That's why I put that into the code yesterday.? I made a short demo video of the changes I've made to the software for my ham club and put it on

HI, Can anyone tell me where i can buy the on/off/volume control for the V6 bitx mines broken off. dave