¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Antuino software

Jack, W8TEE
 

It's the native file format for Open Office, which is a pretty good substitute for Microsoft 365 with one exception: it's free.

Jack, W8TEE

On Saturday, July 23, 2022 at 10:06:16 PM EDT, Gerald Sherman <ve4gks@...> wrote:


An .odt file is an Open Document Text file.? The program that will read it is Libre Office.? This is a free program, almost identical to Microsoft Office.??? It is available for Linux, Windows, and Raspbian (the Raspberry Pi operating system).? I use Linux, not MS.

Gerry Sherman

Sent by the Thunderbird

On 2022-07-23 21:59, Roy Appleton wrote:
What program reads an .odt file!

Thanks,
Roy
WA0YMH?

On Sat, Jul 23, 2022, 4:11 PM Gerald Sherman <ve4gks@...> wrote:

You should be using the INPUT port, not the OUTPUT.? I made the same mistake at first.? I did a review of the Antuino for the local radio club.? I am attaching a copy so you can read? it and figure things out.

Gerry Sherman, VE4GKS

Sent by the Thunderbird

On 2022-07-23 20:49, sm6moj wrote:

I have never been able to get an SWR trace on my Antuino. Several known antennas have been connected to the RF Out port, and scans from a few kHz to several MHz have been selected. But no deal. The screen just shows a slow trace along the bottom edge, but that is all. I have checked the circuit board, and the resistors that are mentioned in the official modification have been removed. So I assume that the software should also be the latest release.

Does anybody have a copy of the latest assembled software? I have not managed to compile it myself.

If this is a known fault, is there any reason to mess about with the device before junking it?

Andrew

SM6MOJ


--
Jack, W8TEE
Join [email protected] to automatically receive all group messages.