Jack:
Does the ubitx 6 have a clone? I am going to compile and upload this afternoon. It would be good to know.?
Gary
toggle quoted message
Show quoted text
On Jul 19, 2020, at 9:49 AM, Jack, W8TEE via groups.io <jjpurdum@...> wrote:
?
Gary:
I think people who bought Nano clones will likely run into this problem. They will also likely have to install the CH340/CH341 device driver since the clones use a different chip for the USB interface. I'd like to hear from anyone who has compiled the code for a genuine Nano to see if they had problems.
Jack, W8TEE
On Sunday, July 19, 2020, 9:31:24 AM EDT, Gary Dumbleton <gary@...> wrote:
I also had the old boot loader selected before the upload worked.?
Gary
On Jul 19, 2020, at 9:19 AM, Jack, W8TEE via groups.io <jjpurdum@...> wrote:
?
All:
I used Arduino 1.8.12 running Windows 10 to compile the v6 code on a Nano I have lying around. I got this:
Sketch uses 30670 bytes (99%) of program storage space. Maximum is 30720 bytes.
Global variables use 819 bytes (39%) of dynamic memory, leaving 1229 bytes for local variables. Maximum is 2048 bytes.
However, it would not upload until I used the Tools --> Processor --> ATmega328P (Old Bootloader) option. I also have the CH341 device driver installed.
Jack, W8TEE
----- Forwarded Message -----
From: Jack, W8TEE via groups.io <jjpurdum@...>
Sent: Sunday, July 19, 2020, 9:07:10 AM EDT
Subject: Re: [BITX20] R1.5.1 Minor Update #arduino #v6 #ubitxv6 #ubitx #firmware #nano
Thanks, Evan. I did find it and have downloaded it. I'm going to try and compile it now.
Jack, W8TEE
On Sunday, July 19, 2020, 9:01:52 AM EDT, Evan Hand <elhandjr@...> wrote:
Jack,
I found it at
Reed,
Would you please confirm?
Thanks,
73
Evan
AC9TU
--
Jack, W8TEE
--
Jack, W8TEE
--
Jack, W8TEE
