¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Compiling ?BITXv6

Jack, W8TEE
 

Gary:

I think people who bought Nano clones will likely run into this problem. They will also likely have to install the CH340/CH341 device driver since the clones use a different chip for the USB interface. I'd like to hear from anyone who has compiled the code for a genuine Nano to see if they had problems.

Jack, W8TEE



On Sunday, July 19, 2020, 9:31:24 AM EDT, Gary Dumbleton <gary@...> wrote:


I also had the old boot loader selected before the upload worked.?

Gary

On Jul 19, 2020, at 9:19 AM, Jack, W8TEE via groups.io <jjpurdum@...> wrote:

?
All:

I used Arduino 1.8.12 running Windows 10 to compile the v6 code on a Nano I have lying around. I got this:

Sketch uses 30670 bytes (99%) of program storage space. Maximum is 30720 bytes.
Global variables use 819 bytes (39%) of dynamic memory, leaving 1229 bytes for local variables. Maximum is 2048 bytes.

However, it would not upload until I used the Tools --> Processor --> ATmega328P (Old Bootloader) option. I also have the CH341 device driver installed.

Jack, W8TEE


----- Forwarded Message -----
From: Jack, W8TEE via groups.io <jjpurdum@...>
Sent: Sunday, July 19, 2020, 9:07:10 AM EDT
Subject: Re: [BITX20] R1.5.1 Minor Update #arduino #v6 #ubitxv6 #ubitx #firmware #nano

Thanks, Evan. I did find it and have downloaded it. I'm going to try and compile it now.

Jack, W8TEE

On Sunday, July 19, 2020, 9:01:52 AM EDT, Evan Hand <elhandjr@...> wrote:


Jack,
I found it at


Reed,
Would you please confirm?

Thanks,
73
Evan
AC9TU

--
Jack, W8TEE

--
Jack, W8TEE

--
Jack, W8TEE
Join [email protected] to automatically receive all group messages.