开云体育

I will send you a file, then you have to to use xloader on Windows or
use the script I provided for Linux to send it to the Ubitx Raduino.

Here are the two HEX files,

UBITX_CEC_V1.100_NX.hex
UBITX_CEC_V1.100_NX_S.hex ** Only if you have
the S meter circuit


On Sun, Mar 24, 2019 at 1:34 PM Laddie via Groups.Io
<laddie2@...> wrote:

what is this "Then the correct firmware for the Ubitx."
and how is it done?

----- Original Message -----
From: "Laurence Oberman" <oberman.l@...>
To: "BITX20" <[email protected]>
Sent: Sunday, March 24, 2019 1:15:19 PM
Subject: Re: [BITX20] NEED HELP

Hello

Which HMI file.

There are only two files.
The correct firmware for the Nextion display whihc it seems you have
already loaded.
Then the correct firmware for the Ubitx.
That's it.
No reason for you to to be in the Nextion Editor at all.

I can do a video for you to help you but wont be until tomorrow
Regards
Laurence

On Sun, Mar 24, 2019 at 12:38 PM Laddie via Groups.Io
<laddie2@...> wrote:

Yes it was working with the original display.
I am trying to install the HMI file using nextion editor but it keeps failing.
I have a usb cable from my computer to the arduino port.
----- Original Message -----
From: "Laurence Oberman" <oberman.l@...>
To: "BITX20" <[email protected]>
Sent: Sunday, March 24, 2019 11:43:32 AM
Subject: Re: [BITX20] NEED HELP

Remove the SD card,
Ensure the Ubitx has the Nextion firmware and then its should work.
Was this working before on the original LCD that can with the Ubitx

The V5 has newer firmware



On Sun, Mar 24, 2019 at 11:09 AM Laddie via Groups.Io
<laddie2@...> wrote:

OK new sd card and it........................LOADED! HOOORAY.!
Now the beautiful screen shows up on startup but is-int operating.
What is next?

----- Original Message -----
From: "Evan Hand" <elhandjr@...>
To: "BITX20" <[email protected]>
Sent: Saturday, March 23, 2019 1:18:53 PM
Subject: Re: [BITX20] NEED HELP

At this point I would get another SD card. It is the cheaper of the two devices to swap out.

73
Evan
AC9TU