Yes it was working with the original display.
I am trying to install the HMI file using nextion editor but it keeps failing.
I have a usb cable from my computer to the arduino port.
toggle quoted message
Show quoted text
----- Original Message -----
From: "Laurence Oberman" <oberman.l@...>
To: "BITX20" <
[email protected]>
Sent: Sunday, March 24, 2019 11:43:32 AM
Subject: Re: [BITX20] NEED HELP
Remove the SD card,
Ensure the Ubitx has the Nextion firmware and then its should work.
Was this working before on the original LCD that can with the Ubitx
The V5 has newer firmware
On Sun, Mar 24, 2019 at 11:09 AM Laddie via Groups.Io
<laddie2@...> wrote:
OK new sd card and it........................LOADED! HOOORAY.!
Now the beautiful screen shows up on startup but is-int operating.
What is next?
----- Original Message -----
From: "Evan Hand" <elhandjr@...>
To: "BITX20" <[email protected]>
Sent: Saturday, March 23, 2019 1:18:53 PM
Subject: Re: [BITX20] NEED HELP
At this point I would get another SD card. It is the cheaper of the two devices to swap out.
73
Evan
AC9TU
