Jeff,
? ?If you desire to work through the process of understanding the Arduino IDE, library management, and the way different IDEs behave, please let us know which version of the IDE you're using, which libraries you've installed, and from where you acquired the firmware you're working with.
? ?If you simply want a 'known good' upgrade to install so you can continue to operate or troubleshoot your V3 uBITX, I strongly recommend downloading one of the compiled binaries of the CEC firmware.
? You'll need to select the correct package.? Download the one titled "HEX1.1.zip" and uncompress it (winzip, 7zip, tar, etc.)? If you're using a radio with a standard Raduino, use the "UBITX_CEC_V1.100_16P.hex" file.? Don't worry about the memory manager or about calibration settings at this point - the calibration won't be erased when you install the new firmware.
? Download a copy of Xloader from here:
? ?Remove the raduino from the radio (may work in situ, but as I've only had success when removing the raduino or the Arduino if socketed, I'll recommend that), connect and identify the port, run xloader, select the 16P hex file, confirm the port and "Duemilanove/Nano(ATmega328" is selected,? and upload the file to the Arduino.? Reassemble and run.
? 73, Andy, KG5RKP
