On 25 April 2018 at 09:33, John <vk2eta@...> wrote:
Hi Geoff,
I just realised that you can't use the push button either so you won;t be able to access the voltage monitor, so forget the last point about the other software.
One think I find strange is the 1V only on the PTT line.?
One option would be if you feel like it is to isolate (de-solder the cable or selectively remove the female pins in the controls connector) the PTT, Key input and encoder's push-button. That would leave only? the encoder and allow you to see if at least this is working.
