Re: n6dt vswr mod -7 volts reflected 0.68 fwd???
|
Alan, Disregard below regarding winding direction.? What is important is that dot markings on the transformers be observed.? Can be confusing with one turn windings. Mike K5ESS
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of K5ESS
Sent: Sunday, April 15, 2018 10:18 AM
To: [email protected]
Subject: Re: [BITX20] n6dt vswr mod -7 volts reflected 0.68 fwd???? Alan, Winding direction shouldn¡¯t matter for this circuit.? Try reversing the diode on the port with the negative voltage. Mike K5ESS ? From: [email protected] [mailto:[email protected]] On Behalf Of Alan -MM?WXT
Sent: Sunday, April 15, 2018 9:57 AM
To: [email protected]
Subject: Re: [BITX20] n6dt vswr mod -7 volts reflected 0.68 fwd??? ? Hi Don and John.
Earth of meter placed on ground plane when i got negative reading i swapped red vm lead to earth and took the higher (8.64v now)reflected reading as forward, and the lower 0.68 as reflected.
50 watt dummy load and according to rf probe calculations i am driving 8 watts on 20m
I am going to strip it back and rebuild and reverse the toroids.It now resembles a bit of a Dogs Dinner.
I will let you know how i get on....
Alan
--
MM?WXT
GQ15057
|
