It depends on his Cura
software setup.? I don't have to scale using Simplify3D.
The stl files are created
by Solidworks and are standard.
There are lots of YouTube
Videos on Cura for him to watch.
I use 40% and ABS at
225D with bed at 110D.
Every one has to
adjust things to get satisfying results.
3D printing is
sometimes really "iffy"!
Thanks for the files.?
I will try them.
Mike
Here are my stl
files.
Both printed? with 3 layers of wall thickness 20% infill. I use
.3mm layer height.
They should be a direct fit without scaling.
I generally use Repetier Host and choose Sli3er as the slicer.
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
