¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Bitx40 with Raduino stopped working #bitx40help #bitx40

 

Also check that your ground connection to the Raduino is correct.

If your GND to the Raduino is OK, but you're still getting only 0.04V out
of the regulator, then
- either the regulator output is somehow shorted. Inspect the Raduino
board, check for any shorts, check capacitor C3 (1 uF).
- or the regulator is defective (replace it)

On Fri, March 2, 2018 16:20, Jamie Dean - KW4XR wrote:
On 20v range I'm getting 0.04 volts
Join [email protected] to automatically receive all group messages.